How To Make a Betta Fish Tank Divider.

ADVERTISING

LuxoGear Emergency Whistles with Lanyard

Shop now »

NOCO Genius GEN5X2, 2-Bank, 10A (5A/Bank) Smart Marine Battery Charger

Shop now »

RHINO USA Boat Trailer Transom Straps (2PK)

Shop now »

LUCKY Kayak Portable Fish Depth Finder

Shop now »

Seaview 180 V3 Full Face Snorkel Mask

Shop now »

Most popular comments
for How To Make a Betta Fish Tank Divider.

Live comments
Comments on YouTube

Lifewithpets - 7 years ago

We had so many request to make these dividers they are now available for sale in the USA. For more details visit http://www.lifewithpetsgci.com/store.html.

Lifewithpets - 6 years ago

I think with the dwarf frogs it may make it a little too small if you divide it. Our dividers are easy to use. If you have the tank already set up you'd need to remove all decorations and divide the gravel. Add the divider and you're all good to go. All our divider information is on our website.

freshlyunreal - 6 years ago

Lifewithpets I allrdy have a 10 gallon setup with 1 betta 2 dwarf frogs and 4 shrimp. I would like to divide the tank, whats the easiest way to do this. I also want to buy your divider to do this with. Thanks for any information!

Saikat Sengupta - 7 years ago

+Lifewithpets Wish you were selling these overseas as well. :(

Sylvia Bond - 6 years ago

i need 2 dividers for my 10g fish tank with houes

Lifewithpets - 6 years ago

Website link is in the description box of the video.

Jacqueline Goldman - 6 years ago

Please let me know if you ever start producing sand waterfalls. So hard to find.

Jacqueline Goldman - 6 years ago

Amazing video. Most educated betta raiser ever. If you start producing these.you should probably copyright this. I'm ready to order three dividers and tops. Thank you you've helped me to raise some beautiful relaxed and happy betta. I couldn't have done it without your videos. Jackie

Lifewithpets - 6 years ago

Thank you. We sell the dividers but not the lids. Link to our store is in the description box of the video.

Robin Primeau - 6 years ago

I did this, but i put the holes bigger (not that big) for my gerbils. I'm getting a new gerbil because I had two and one died, so I'm getting a new one. Gonna switch the gerbils four to five times a day so that the new gerbil and the old gerbil can get used to the scents of each other. :)

Random Taco - 6 years ago

Can I put one male on either side, with the holes in the divider or will the males see each other and get stressed or try to fight?

Lifewithpets - 6 years ago

Yes, you can put a male on each side. They can only see each other periodically and as long as the tank is heavily decorated they will be fine.

Amanda Gonzalez - 6 years ago

do you only need one heater? or one heater per area

Lifewithpets - 6 years ago

One heater in a 10 gallon divided tank. You may need two in a 20 gallon long tank if you divided it 3 or 4 ways.

Sinto Joseph - 6 years ago

it was good but divider need to be transparent.

Lifewithpets - 6 years ago

Not for bettas. Bettas ideally shouldn’t see each other all the time otherwise they will get stressed. It is ok to give bettas flare time either seeing themselves in a mirror or other bettas but not 24/7. If it’s for other fish you can use acrylic and then they can see each other.

Pet Central 101 - 6 years ago

Correct me if I'm wrong, but I heard you can't put male and female bettas together in a divided tank because of hormones. Or is that plakat a male?

Pet Central 101 - 6 years ago

Lifewithpets ohh okay.

Lifewithpets - 6 years ago

There were are only males in this tank.

10. comment for How To Make a Betta Fish Tank Divider.

Selena Wolf - 6 years ago

Hey I gotta question will you be restocking the store soon or at all? Because it's almost sold out and I really would LOVE to buy some dividers but by the time I get the money I fear you will be sold out. If you see this thanks for your time!!

Selena Wolf - 6 years ago

Thank you so much!

Lifewithpets - 6 years ago

Yes, more dividers are added to the store each week.

Morgan - 6 years ago

I bought a unique aquarium that already came with a divider that has holes. I now have my two male bettas in it, but every little bit my King betta sees the other one and flares up. I'm worried this will over stress him, so is there a way I could cover the holes on the divider I already have? Thank you!

Anouk van der Veen - 6 years ago

Morgan maybe cut up an sponge (as in filter media ofc) and stuff those in the holes?

Melissa Schumacher - 6 years ago

Is there anyway possible that I can buy a divider without holes for an aqueon 5.5 gallon tank???? Please reply back asap.

Jaxxon the Healer - 6 years ago

Awesome job you guys rock, thank you so much for sharing !!

Shah Sen - 6 years ago

update your betta please... ty

peggy Holliday - 6 years ago

What's the name of the material used for the sheet of the divider? I cannot for the life of me find it anywhere! I don't want to add any old plastic sheet in the water through fear itl toxify the water :)

Lifewithpets - 6 years ago

It's Sintra pvc. If you can't find it and live in the USA, we sell the dividers now on our website.

animalobsessedkate - 6 years ago

How many millimeters thick is the divider?

Jessie Harris - 6 years ago

I'm also curious how thick the divider material is. I'd love to try and make my own since you don't sell them to fit my tank but I'm not very handy so I need all the help I can get. Haha. Thanks for coming up with these! These are so much better than any other divider on the market.

CoolgirlHK - 6 years ago

We're do I buy the black pvc ? And do you only take PayPal in your store ?

Lifewithpets - 6 years ago

We get it from a supplier. No if you follow the process through it will take you to the PayPal page but there is an option to pay without PayPal.

Haodijam Romila - 6 years ago

Hey,Swelare ,Can you please share all your videos on WhatsApp messenger cause Our internet connection is on accessing of other location work and Watch them Very much,Please ,Search as Hoajijam Romila ,I want to watch them very much please

G Fi - 6 years ago

Desperately need one of these dividers, but you don't ship to Canada :(

G Fi - 6 years ago

:( One day I hope you guys will be able too. That'd be amazing.

Lifewithpets - 6 years ago

Unfortunately not:(

20. comment for How To Make a Betta Fish Tank Divider.

2Fit2QuitK9 - 6 years ago

If I order 2 10g dividers tonight how long will it take for processing and shipping?

Lifewithpets - 6 years ago

If they're ordered today (Sunday) they will ship tomorrow. They usually take 2-3 days.

Johnny Huerta - 6 years ago

I want to get one would I fit my 10 gal it's 10 in wide and 20 in long

Lifewithpets - 6 years ago

What make is it?

Amanda - 6 years ago

These look great! Do you make any for an aqueon 20 gallon high tank? I didn't see any on your website :-(

Amanda - 6 years ago

Lifewithpets thanks so much for the info, I appreciate it :-)

Lifewithpets - 6 years ago

The materials we use to make them fit a variety of tanks are not tall enough for the 20 gallon tall tanks. We have tried sourcing it but haven't found anything suitable yet.

Amanda - 6 years ago

Aw bummer! Can I ask why? Does it have something to do with the materials not working with the 20 gallon high dimensions? Just wondering, because if not, maybe I'll try to make one myself. Thanks!

Lifewithpets - 6 years ago

Thanks, no we don't do them for the 20 gallon tall, sorry.

jordi lizaola - 6 years ago

i looked at your website and the outside of the dividers has a black thing but they dont in this video , can i order it like exactly in this video

Lifewithpets - 6 years ago

You can take the black bars off but it probably won't firmly fit your tank. Using those was the only way to make the divider adjustable to fit a variety of different tanks.

Richard The Psychic Chicken - 6 years ago

I made a divider with scraps of a screen door, works very well.

Gorgeous Bettas - 6 years ago

Where did you buy the pvc

Lifewithpets - 6 years ago

We get it from a supplier. We make and sell these dividers now. The link is in the description box.

Ty Y - 6 years ago

what's the name of the material?

Bonnie 1000 - 6 years ago

Can I put a female and a male betta in a divided tank

Lifewithpets - 6 years ago

Ideally not. Check out my latest divided tank video. I talk about that topic on that.

Netanya Rose - 6 years ago

would your 5.5 gal. dividers fit into a 5 gallon tank or are they slightly too big?

Lifewithpets - 6 years ago

Thank you. I've just received the order.

Netanya Rose - 6 years ago

Thanks! I need two but i could only order 1 for now

Lifewithpets - 6 years ago

Yes, the divider will fit! We are running a sale on the website at the moment and I think for the reduced 5.5 gallon dividers there's only one left.

Netanya Rose - 6 years ago

The tank itself is 16x10x8in. And i did notice that when i first put water into it it did take a little more than 5 gallons so maybe is a 5.5 gallon and they just didnnt say so on the box

Lifewithpets - 6 years ago

Those tank dimensions include the box it comes in. Can you measure the tank itself. Looking online although it says it's 5 gallon, in the description etc it's says 5.5 gallon.

Netanya Rose - 6 years ago

I have the Aquaculture 5 gallon starter kit

Netanya Rose - 6 years ago

18.00 x 10.25 x 12.37 In. i believe

Lifewithpets - 6 years ago

What are the dimensions of the tank?

turpoemmelie - 6 years ago

Hello I just ordered one of ur 10g dividers with holes. How long will it take to arrive? :) I'm in Michigan USA

turpoemmelie - 6 years ago

Lifewithpets perfect, thank u!

Lifewithpets - 6 years ago

Thank you! They typically take 3-4 business days.

30. comment for How To Make a Betta Fish Tank Divider.

Jazmin Bretado - 6 years ago

Great video

Lifewithpets - 6 years ago

Thank you. Due to popular demand we now sell these on our website:)

Angie Camacho - 6 years ago

Hi I want to get a 5 gallon and divide it with my male and female betta my dad is going to help me put a pvc glass divider but not holes the bottom where the gravel is isn't going to be close like it's going to be all the way down but still be the same water is that of do I need to still buy another heater for the other half or should I just drill holes

Angie Camacho - 6 years ago

Lifewithpets oh I know I'm going to get black pvc

Lifewithpets - 6 years ago

If the glass is siliconed I guess it should be ok but If they can see each other you'd need to find a way to black it out. They'd be so stressed otherwise.

Angie Camacho - 6 years ago

Lifewithpets Oh OK I don't have space for two tanks any more so if I put glass in the middle and silicone it it's fine right it'll be like two tanks in one

Lifewithpets - 6 years ago

Ideally a male and female should not share the same tank even if divided. The hormones they release into the water will cause them a great deal of stress.

thatguyjosh thattallguyy - 6 years ago

I saw in a newer video your divided didnt have holes would that be okay to do im gonna be making a good bit of these soon

Lifewithpets - 6 years ago

Yes with or without holes works well. We now sell both on our website. If you don't do holes you will definitely need filtration on both sides.

Giancarlo Soto-Cervantes - 6 years ago

Hey life with pets do you think that a top fin 10 gallon filter on one side will be enough to filter both sides of the tank if i were to divide it with one of your dividers?(The one with holes)

Lifewithpets - 6 years ago

Yes you could use a sponge filter. The airstone would work too. I do prefer filtration on both side of a divided tank though.

Giancarlo Soto-Cervantes - 6 years ago

Hey Lifewithpets would a sponge filter be appropriate to put in with the top fin 10 gallon filter when I've divided the tank? I read that its better than an air stone because it filters and creates oxygen,is this true?

Giancarlo Soto-Cervantes - 6 years ago

Ok thank you so much so all I will probably need is an air stone too have water surface movement. Again thanks so much.

Lifewithpets - 6 years ago

Yes it would be enough, it's whether the flow will be too strong. We do recommend if you're having filtration on one side only that you add an airstone on the other side for a little water surface movement. I've seen several people use sponges as dividers and whilst I think it's a good short term option they eventually will collapse over time. The one factor they talk about the most is that's it's difficult to clean.

Giancarlo Soto-Cervantes - 6 years ago

Also do you think that black sponge would be good for dividing a tank?

Lao Thao - 6 years ago

when you you have one avaible for 29gal tank?

Lifewithpets - 6 years ago

Unfortunately the taller tanks are more difficult to make them for due to the materials we use. However we are looking for a solution.

emdoesit :p - 6 years ago

Does anyone know where you could buy a divider like this?

Lifewithpets - 6 years ago

We sell them on our website. Lifewithpetsgci.com

anfarlamb - 6 years ago

How would you rate the filter you use {the Aqueon one, not the other ones}? I've been looking for a new filter for a 2.5 gallon tank and was wondering your opinion on this one. I know you're good at this stuff, lol, so I decided to ask you. (:

anfarlamb - 6 years ago

Okay, thanks!

Lifewithpets - 6 years ago

It's a good filter but way too strong for a 2.5 gallon tank. The best filter for the smaller tanks is a sponge filter.

Jlui83 - 6 years ago

I'm interested in purchasing a tank divider for a 20 gal long tank. I want to divide the tank for freshwater shrimp. Any idea if I get the divider with no holes and if I just used a heater on 1 side will the other side be heated as well?

Bailey Hodge - 6 years ago

Lifewithpets will we be able to buy in Australia

Lifewithpets - 6 years ago

Hi, with no holes I would recommend a heater on both sides. It may be alright without but I can't guarantee it.

ADAM'S TV - 6 years ago

How many betas female can I have in a 5.5 gallon tank?

ADAM'S TV - 6 years ago

Ok thank you very much!

Lifewithpets - 6 years ago

ADAM'S TV If you're going to divided the tank you can have two. Otherwise one Betta. You need a minimum 10 gallon for females if you want to do a sorority. Ideally a minimum of 5 females in a very heavily planted tank. Sororities often fail so you need to be sure you have enough tanks available if you need to separate them.

jorge martinez - 7 years ago

what was the divider made of I can't seem to find it in stores

jorge martinez - 7 years ago

+Lifewithpets
Thank you so much this will help my Betta fish and me a lot so much

Lifewithpets - 7 years ago

This one was made of Sintra pvc. You can get it at Home Depot. There are links in the comments. We also sell the dividers now at www.lifewithpets72@weebly.com under our store. There's also a video on the website on how to install it.

Da silva - 7 years ago

what did you used for the lid ? thanks

Lifewithpets - 7 years ago

It's acrylic, it does bend over time but we just flip it over each time we water change.

14chevan - 7 years ago

Where do you get your bettas?

Lifewithpets - 7 years ago

Petsmart and Petco.

yaoming yen - 7 years ago

I hope you sell those types of lids one day in the near future.

MURAT ÇETİNER - 7 years ago

What materials did you use to separate from the aquarium

MURAT ÇETİNER - 7 years ago

Lifewithpets Thanks. I have 2 male betta .I can not find female betta

Lifewithpets - 7 years ago

It's a foam board pvc. You can buy it from Home Depot if you're in the USA.

Henny Zoel - 7 years ago

late but 132

Denise Pollitt - 7 years ago

It's ok, found my answer further down the comment secti8n.

Denise Pollitt - 7 years ago

Hi, at the beginning of the video you said what type of pvc you were using. wold it be possible for you to spell that please? Also, I'm in the UK, do you think that pvc will be available in any large hardware shop here? Thanks!

Sabrina wong - 7 years ago

Your ten gallon looks huge compared to mine

Lay_hall_jr - 6 years ago

Boi u dum look it up loser

Mr Penguin - 6 years ago

there is 10 gallons tall and 10 gallon long then theres this which is about 1/2 of both

Cute GPigs - 7 years ago

Can I use coraplast? Like the stuff the 'vote banana to be president' are made out of.

Lifewithpets - 7 years ago

I'm not sure what that it so I can't say one way or the other. Sorry!

Will G - 7 years ago

I mean did you have two or more filters?

Lifewithpets - 7 years ago

Not in this tank no, but we do now in the divided tanks. We have sponge filters or our DIY filters on each side.

50. comment for How To Make a Betta Fish Tank Divider.

Will G - 7 years ago

How did you glue it in?

Lifewithpets - 7 years ago

We didn't need to glue it because it was an exact fit.

Will G - 7 years ago

Do they stress because they can still sort of see each other right? I guess I could make less holes

Lifewithpets - 7 years ago

No, not at all although each betta is different. You could do less holes though if you're worried about it.

Will G - 7 years ago

How do you make a lid?

Lifewithpets - 7 years ago

This is the video on how we made them. https://youtu.be/Ro5xigLb7JY

M. Bellelove - 7 years ago

So if one fish gets sick, wouldn't the other one also be infected ?

Lifewithpets - 7 years ago

Yes that is possible like with any fish tank. We've never had it happen but it is possible.

Amanda Galindo - 7 years ago

Is this a 10 gallon tank from PetSmart? If so, what are the measurements for the pvc divider?

Lifewithpets - 7 years ago

No, it's from Petco. All tanks are different sizes even if they're from the same place. The measurement are all slightly different.

yaoming yen - 7 years ago

I would buy some of those!

Hannah Renee - 7 years ago

There's a filter on both sides?

Lifewithpets - 7 years ago

No, one side just has an airstone for a little water movement.

ashley herman - 7 years ago

can you add the dimentions please?

Lifewithpets - 7 years ago

All tank sizes differ. You'd need to measure your own tank to get the correct size.

Thomas keider - 7 years ago

looks great!

Lifewithpets - 7 years ago

Thanks!

Betta Plakat - 7 years ago

Where do you get Sintra pvc in the U.K.?

Lifewithpets - 7 years ago

I'm in the USA.

Betta Plakat - 7 years ago

Lifewithpets where did you buy yours?

Lifewithpets - 7 years ago

I'm not sure but if it's like in the USA it would be B&Q. Sintra is just a brand name over here for the closed cell pvc foam board.

WAX MELT LOVER - 7 years ago

I just ordered mine off of eBay. It's so much easier

mandalynFSU - 7 years ago

This is wonderful! Thank you so much for explaining how you did this! I can't wait to make one for myself. I love your channel!

Lifewithpets - 7 years ago

Thank you, I'm glad it was helpful.

fish Betta - 7 years ago

did you made those tank or did you buy them?

Lifewithpets - 7 years ago

They're 10 gallon tanks from Petco.

Sweet Tooth :D 0008 - 7 years ago

Did you use a 20 gallon tank??

Lifewithpets - 7 years ago

No, it's a 10 gallon tank.

Jesus' Warrior In the End Times - 7 years ago

Hello, thanks for this info. I like the simplicity of your project and will create this kind of divider in the future. I couldn't understand what the material was that you used for the divider. Can you provide the name of the material and some ideas on where to get it?

Thanks!

Lifewithpets - 7 years ago

Thank you!

Jesus' Warrior In the End Times - 7 years ago

Thanks again! I've subscribed to your channel in hope that I can learn some other useful tips on how to care for bettas. :)

Lifewithpets - 7 years ago

No problem! I hope making the divider works out as well for you as it has for us.

Jesus' Warrior In the End Times - 7 years ago

AWESOME! That is really helpful! I really appreciate it! Thanks! :)

Lifewithpets - 7 years ago

Thanks for watching! Home Depot sell it. Here is a link to the PVC. http://www.homedepot.com/p/Palight-ProjectPVC-12-in-x-12-in-x-0-236-in-Foam-PVC-Black-Sheet-159842/206402741?MERCH=RV-_-rv_gm_pip_rr-_-205437929-_-206402741-_-N

Vlad B - 7 years ago

Hey where do you buy this divider?

Vlad B - 7 years ago

Thank you .

Lifewithpets - 7 years ago

You can buy the PVC at Home Depot.

Shelbi Green - 7 years ago

I love this!

Robert Kowalke - 7 years ago

Great Job! Best way to house multiple Males, I actually have a similar design but divided the tank in 3 using an internal tanks sump I designed just for bettas which I will be making my 1st video ever on. Waiting for patent information and details before debuting this design though ;)

Great work as always love your Channel!

Lifewithpets - 7 years ago

Thank you. I look forward to seeing that, that's very wise to wait till you have all the patents in place.

keith lagoe - 7 years ago

This is great, And you know what? - Yes that right I'm going to make this for my Guppie breeding project, to keep Males & Females apart,

Lifewithpets - 7 years ago

That's great! I hope it works out for you.

Sadia Iqbal - 7 years ago

I'm planning to make this divider but lm scared that beta can see through the holes n they can be flared. That is not good for beta plz tell me what is true

Lifewithpets - 7 years ago

The holes in our divider are small, however you can put as many or as few as you'd like. The Bettas do occasionally appear to see each other but rarely flare. Occasional flaring is good for a Betta.

Lovebetta - 7 years ago

Got the answer from the previous comments. Tyty.

Lifewithpets - 7 years ago

Lovebetta - 7 years ago

What do you call this pvc and the thickness pls. I want to try. Ty

Javier Frausto - 7 years ago

Where did you buy the pvc?, please is very important

Lifewithpets - 7 years ago

You can buy it from Home Depot. http://www.homedepot.com/p/Palight-ProjectPVC-12-in-x-12-in-x-0-236-in-Foam-PVC-Black-Sheet-159842/206402741?MERCH=RV-_-rv_gm_pip_rr-_-205437929-_-206402741-_-N

betta r chanel - 7 years ago

Thanks

betta r chanel - 7 years ago

I am going to make this same divider in the future

Lovebetta - 7 years ago

+Lifewithpets this one is perfect. One day maybe I will try to do this.

Lifewithpets - 7 years ago

I agree, I don't like the mesh dividers. They're not very reliable.

Lovebetta - 7 years ago

+Lifewithpets ty. Its like this but not as snug as this one i think because it will come with clip at the bottom. Same material. I dont like the binder and mesh style. This one look classy.

Lifewithpets - 7 years ago

I hope it works out for you:)

Lovebetta - 7 years ago

I was able to get one at Ebay, similar to this one for I think $12. If is not good enough I will do like this one.

Lifewithpets - 7 years ago

Great

Joey D - 7 years ago

You had the best dividers in YouTube so I made 3 of them for a 20 gallon long. Just waiting for the tank to cycle then 4 new bettas from Coast Gem - where you got your goldfish! Luckily I live in San Diego! Thank you so much for your video!!
https://imgur.com/a/xVNFO

Lifewithpets - 7 years ago

Thank you so much, it's good to get positive feedback and see the finished product. Your tank looks amazing!! It's a good job I don't live close to Coastgemusa otherwise I'd be in there all the time.....lol!

Randy Henniger - 7 years ago

Awesome, Thank you! Plan on doing one the same way. Checking out the lid video next!

Lifewithpets - 7 years ago

Thank you.

MorganTheRat 4 - 7 years ago

Hi I'm about to be making this divider for my 10 gallon and I was just wondering where you got the centra pvc hope u can reply! Thx

Lifewithpets - 7 years ago

Home Depot sell it. Here is a link to the PVC. http://www.homedepot.com/p/Palight-ProjectPVC-12-in-x-12-in-x-0-236-in-Foam-PVC-Black-Sheet-159842/206402741?MERCH=RV-_-rv_gm_pip_rr-_-205437929-_-206402741-_-N

Joe A - 7 years ago

I like this divider. I'm going to try to make one myself. Thanks for the info

Lifewithpets - 7 years ago

Thanks for watching.

derrick pierce - 7 years ago

What's a good filter for a betta tank?

boogiemanspud - 7 years ago

Aquaclear 20 works wonderfully from anything from 5-20 gallons. It has a control for flow rate. It's very gentle and good for bettas which don't like strong current. It's inexpensive and has real biomedia and rinsable foam (this saves lots of money over replacement cartridges). Just rinse the foam out in tank water (or non chlorinated water) and you're good to go.

Lifewithpets - 7 years ago

It depends on the size of the tank. What size is the tank?

mopar world - 7 years ago

Where did you get that and do you need the holes?

Lifewithpets - 7 years ago

You can buy it at Home Depot or Lowes. http://www.homedepot.com/p/Palight-ProjectPVC-12-in-x-12-in-x-0-236-in-Foam-PVC-Black-Sheet-159842/206402741?MERCH=RV-_-rv_gm_pip_rr-_-205437929-_-206402741-_-N You don't have to put the holes in but if you don't you'd need to use filtration on both sides of the tank.

Damaris Flores - 7 years ago

How many gallons is the tank

Damaris Flores - 7 years ago

+Lifewithpets thank you

Lifewithpets - 7 years ago

It's a 10 gallon tank.

Tutos Animals - 7 years ago

Awesome ! I am French but I understood all stages of implementation; I will reproduce it in my 14 gallon aquarium ;)

Lifewithpets - 7 years ago

That's great, thanks for watching!

Kevin R - 7 years ago

where would I be able to get a PVC board like the one in the video?

Lifewithpets - 7 years ago

Mykala Brodzinski - 7 years ago

Just watched the video and was wondering why you measured the width of the tank on the bottom and the width under the lip... Wouldn't they both be the same length? Which one did you use to make your divider?

Mykala Brodzinski - 7 years ago

Thank you so much! Was planning on dividing a 55 gallon :)

Lifewithpets - 7 years ago

Thanks for watching. The measurements top and bottom should be the same but often there is slight variation. We've only had slight measurement variations so we go with the smaller measurement and that always gives a good fit.

DeBandit13 - 7 years ago

Thanks

ShutUpSelby - 7 years ago

http://www.homedepot.com/p/Palight-ProjectPVC-12-in-x-12-in-x-0-236-in-Foam-PVC-Black-Sheet-159842/206402741?MERCH=RV-_-rv_gm_pip_rr-_-205437929-_-206402741-_-N

Hi there, I was planning to make a divider and was curious if this is similar to the material you used and if this would work?

Lifewithpets - 7 years ago

+ShutUpSelby If you're on Instagram I'd love to see the finished result. My Instagram link is in the description box.:)

ShutUpSelby - 7 years ago

Awesome thank you!

Lifewithpets - 7 years ago

+ShutUpSelby Yes, this looks like the same product just a different brand name. I don't see why it wouldn't work. If in doubt you should be able to buy acrylic at Home Depot too.

Raymond Cendana - 7 years ago

thanks for the info :)

Lifewithpets - 7 years ago

+Raymond Cendana Thanks for watching.

savannah corliss - 7 years ago

so what exactly kind of pvc is it?

Lifewithpets - 7 years ago

+savannah corliss Thanks for watching. The brand we used was Sintra. Any pvc or acrylic should work.

Sre_ Rich - 7 years ago

I cant use clear lid if I do my betta will try jumping and it will bang its head

Lifewithpets - 7 years ago

+Shreejit Ri Wow, I've not come across that before! I have about a two inch gap between the lid and the water.

Animal Lover - 7 years ago

that's the best! idea ever! for a divider! you are SO clever I LOVE that idea you are also VERY creative ;-) its more work then making a mesh divider but it's sooooooooo much better and sturdy and it TOTALLY works! and it looks a lot more neat and pretty then a mesh divider plus it matches the black frame around the tank! such! a great idea!!! where did you get that black pvc stuff???

Lifewithpets - 7 years ago

+Animal Lover Thank you! We got the Pvc from my husbands work, but you can find it in Lowes or Home Depot. It's not expensive. I'm sure your parents could help you make something like this. I fortunate that my husband likes DIY projects

Halle R - 7 years ago

You guys are so creative!! Love your tanks:}}

Lifewithpets - 7 years ago

+Halle R Thank you!

At Parrish - 7 years ago

Sky

Paris Jean - 7 years ago

This was awesome thanks so much I'm going to need to know how to do this soon (hint hint)

Lifewithpets - 7 years ago

+ParisJean Yay! I'll look forward to seeing the finished tank.

Pink Bettas - 7 years ago

Love your Tank

Lifewithpets - 7 years ago

+PinkFlower1 AJ Thank you!

BusyBettas - 7 years ago

Awesome video! I love how this divider looks in the tank & your setup is amazing!

Lifewithpets - 7 years ago

+BusyBettas Thank you!

Anthony Pets - 7 years ago

Nice video and tank setup!

Lifewithpets - 7 years ago

+Anthony Pets Thanks:)

Sam Lily - 7 years ago

Best betta divider I've seen yet! Going to do this with my tank for sure!

Lifewithpets - 7 years ago

+Sam Lily That's great, let me know how it works out for you. It really looks great in our tanks!

Ki Ki - 7 years ago

omg yassssssss

Lifewithpets - 7 years ago

+Ki Ki Thanks:)

TheDollCorner - 7 years ago

Thank you so much! I have tried making dividers before but struggled, so I'm going to try this one!

Lifewithpets - 7 years ago

+BettaBound Let me know how it turns out! Thanks for watching.

About How To Make a Betta Fish Tank Divider.

The "How To Make a Betta Fish Tank Divider." video is part of the Betta aquarium category, which contains similar videos like this one.