How to Install a YakGear Kayak Anchor Trolley

***Hardware Change for 2016 - The kit now comes with 6 stainless self-tapping screws (2 for the cleat and 4 for the pad eyes) as a replacement to the rivets for the pad eyes. For installation of the pad eyes, simply use technique above with the self-tapping screws.*** Bill Bragman, President, YakGear, Inc., goes through the entire process of installing YakGear's Deluxe Anchor Trolley. Anchor Trolleys provide paddlers the ability to control the position of their kayak or canoe in waters with currents or when experiencing windy conditions. For more information about the Anchor Trolley, visit: www.yakgear.com

How to Install a YakGear Kayak Anchor Trolley sentiment_very_dissatisfied 42

Kayak 10 years ago 236,700 views

***Hardware Change for 2016 - The kit now comes with 6 stainless self-tapping screws (2 for the cleat and 4 for the pad eyes) as a replacement to the rivets for the pad eyes. For installation of the pad eyes, simply use technique above with the self-tapping screws.*** Bill Bragman, President, YakGear, Inc., goes through the entire process of installing YakGear's Deluxe Anchor Trolley. Anchor Trolleys provide paddlers the ability to control the position of their kayak or canoe in waters with currents or when experiencing windy conditions. For more information about the Anchor Trolley, visit: www.yakgear.com

Show More

Advertising
LuxoGear Emergency Whistles with Lanyard

LuxoGear Emergency Whistles with Lanyard

Shop now »
NOCO Genius GEN5X2, 2-Bank, 10A (5A/Bank) Smart Marine Battery Chargers

NOCO Genius GEN5X2, 2-Bank, 10A (5A/Bank) Smart Marine Battery Charger

Shop now »
ADVERTISING
LuxoGear Emergency Whistles with Lanyard

LuxoGear Emergency Whistles with Lanyard

Shop now »
NOCO Genius GEN5X2, 2-Bank, 10A (5A/Bank) Smart Marine Battery Chargers

NOCO Genius GEN5X2, 2-Bank, 10A (5A/Bank) Smart Marine Battery Charger

Shop now »
RHINO USA Boat Trailer Transom Straps (2PK)

RHINO USA Boat Trailer Transom Straps (2PK)

Shop now »
LUCKY Kayak Portable Fish Depth Finder

LUCKY Kayak Portable Fish Depth Finder

Shop now »
Seaview 180 V3 Full Face Snorkel Mask

Seaview 180 V3 Full Face Snorkel Mask

Shop now »

Most popular comments
for How to Install a YakGear Kayak Anchor Trolley

Nomad
Nomad - 7 years ago
I liked this because it showed the things like rivets and those plugs being used . I would probably have used silicon and made those slip if I had not seen this very decent video ! Thanks for posting .
Steve Tautog
Steve Tautog - 7 years ago
Sir
great teaching vid
one question
I do not see where all the chord is stored
do you have 50 100 how many feet of chord
and again where is it located
thank you
kurt taylor
kurt taylor - 7 years ago
This is wrong, do not tie your anchor off like this. Anchor line runs thru the triangle to the larger zig zag cleat he is not using. If you tie off like he's doing, it's gonna rip everything off the side of the boat.
Al Homicz
Al Homicz - 7 years ago
Bought one of theses today and installed it. It no longer comes with rivets, just the self-tapping screws.
John Walton
John Walton - 7 years ago
Curious as to why the instructions say 3" down from the deck and you are going only down around an inch?
weedsnager
weedsnager - 7 years ago
Just purchased the deluxe anchor trolley. No rivets in the package
YakGear Inc
YakGear Inc - 7 years ago
Hi weedsnager, we changed the hardware in the kit in 2016 to contain only tapping screws as opposed to rivets. The video has a popup mentioning this and giving instructions for the install with the tapping screws. Through our research we found out that rivets were not necessary in this install and the tapping screws would more than suffice. I apologize for any inconvenience and please let us know if we can help answer any questions.
ArbitraryLifestyle
ArbitraryLifestyle - 7 years ago
I think I'd used a cam cleat instead of the zig-zag cleat.
Allan Prunier
Allan Prunier - 7 years ago
Hi, just had a question I recently purchased the Yak Gear Anchor Trolley kit and it says to use silicone i'm just tryng to find out what is a good brand to use as I don't want it to affect the kayak in any way
Bernie Simmons
Bernie Simmons - 7 years ago
So what is best means of attachment well nuts, self tapping screws or rivets? Has anyone actually had the self tapping screws tear out while anchored? I purchased the standard leverlok anchor trolley and won't use the self tapping screws if that's not the best means of attaching this hardware.

10. comment for How to Install a YakGear Kayak Anchor Trolley

Frank Hernandez
Frank Hernandez - 7 years ago
did u criss cross the anchor line
olebiker
olebiker - 7 years ago
Thanks for posting this. I went to Academy and got it this morning and had it installed on my new Native Slayer in just a few minutes.
visualkeirockstar
visualkeirockstar - 7 years ago
I already drilled it over the seam. Is that bad?
D.Nasty Fishing
D.Nasty Fishing - 7 years ago
What's up .. my kayak needs some mods let me know . come check me out. support the sport subscribe to D.Nasty Fishing
HOOKEM IN THE MOUTH KAYAK FISHING
HOOKEM IN THE MOUTH KAYAK FISHING - 8 years ago
like andHOOKEM IN THE MOUTH!
Jeffrey Hodge
Jeffrey Hodge - 8 years ago
Great video. Is it beneficial to put an Anchor Trolley on each side of the Kayak?
YakGear Inc
YakGear Inc - 7 years ago
Hi Jeffrey,


Thank you for the kind words. It is really up to your preference on whether or not you want a trolley on both sides but it definitely couldn't hurt! We have a lot of customers with trolleys on both sides of their kayak and they love the convenience of it.
Kevin Mills
Kevin Mills - 8 years ago
with this setup do you only get to anchor at one depth I may not understand?
Glorywhole
Glorywhole - 8 years ago
You should have the anchor line secured on the boat somewhere. The line should run through that triangle. You can get the right depth for your anchor and put the line in a zig zag cleat. Then set up your trolley for the correct anchor position and have it secured in a separate smaller cleat (like in the video). He actually has 2 cleats positioned on the side of the Yak if you look closely.
Bill Bragman
Bill Bragman - 8 years ago
Josef
Please call us at 866-610-7931 ext 700. We will get it figured out.
Josef Roesler
Josef Roesler - 8 years ago
Got your Harken Pulley Kit from Austin Kayaks. The screws aren't long enough to engage the wellnuts. How is this supposed to work?
Len Conticello
Len Conticello - 8 years ago
thanks for posting this. I just installed my anchor trolley and this video made it super easy. thanks!

20. comment for How to Install a YakGear Kayak Anchor Trolley

dmger14
dmger14 - 8 years ago
Great video. Is it better to use the self tapping screws for the pad eyes or buying and using rivets?
Don H
Don H - 8 years ago
OK.
dmger14
dmger14 - 8 years ago
FYI - I haven't had any problems with the self tapping screws that come with the anchor trolley.
Erik Olson
Erik Olson - 8 years ago
How do you know how long to leave the anchor line? Sometimes i anchor in 4 feet in freshwater, sometimes 30 feet in saltwater.
Matt M.
Matt M. - 8 years ago
how do you tie off your anchor rope to the anchor tether? I have one of your kits on they way.
Dano Gjedda
Dano Gjedda - 8 years ago
Nice movie. Geek 40 year old virgin.
TubeYou
TubeYou - 8 years ago
Why didn't my kit come with rivets?? I don't have inside access and would like to be able to use the kit I bought.
iwantosavemoney
iwantosavemoney - 8 years ago
after watching a few more videos I think this guy making instructional videos. needs to watch a few instructional videos on how to install anchor trolley properly. but you never know he may have the old instructions and could not read them.
iwantosavemoney
iwantosavemoney - 8 years ago
am no expert in these by no means but it looks to me like this was done up side down. the way this one was installed the trolley line will alway rub the line below it. if the trolley line is on the bottom it can never touch the other line. but that is is just my common sence way of thinking.
James West
James West - 7 years ago
Actually, he threaded the trolley line just like you were hoping / referencing. The confusing item is that he puts the lower line (with the triangle) through the zig zag a couple of times instead of putting the upper trolley line in the zig zag. He switches at the end and does zig zag the upper line into the cleat.
Joseph Parrish
Joseph Parrish - 7 years ago
iwantosavemoney I was thinking that too.
phartattack
phartattack - 8 years ago
Your "Fisherman's Knot" is actually called "Improved Cinch Knot in case anyone wants to google it".
The actual "Fisherman's knot" is where you take the 2 ends of the rope and tie them to each other which is actually how I tie my anchor trolley and put my loop between the 2 knots after pulling them apart to get just the right tension.
Imagine grabbing each wrist with the other hand, that's what the fisherman's knot looks like.
I do like your system especially the 2 slanted pad eyes. those will really clean up and guide the line over weird curves in the boat/kayak.
And THANK YOU for adding the HOW TO USE the Anchor Trolley. 90% of the how to videos do not show how to use it. There are several different ways but yours is the most obvious use.
phartattack
phartattack - 8 years ago
Seriously? Cinch/Clinch same thing... Some people.
I pointed that out simply so people can find the correct knot. 
Scott Craven
Scott Craven - 8 years ago
It's actually improved clinch knot, not "cinch".
iwantosavemoney
iwantosavemoney - 8 years ago
+phartattack all over it good stuff
phartattack
phartattack - 8 years ago
There is a Cinch knot and an Improved Cinch. The "Improved" is where you go back through the loop.
iwantosavemoney
iwantosavemoney - 8 years ago
what is the improved part of that knot?
Mike Branch
Mike Branch - 8 years ago
Instead of silicone, could you use "marine sealant" as a substitute?
Jesus Ortiz
Jesus Ortiz - 9 years ago
Muy practico..

30. comment for How to Install a YakGear Kayak Anchor Trolley

Chris Wilke
Chris Wilke - 9 years ago
Just bought mine today and going to install tomorrow. Thank you for the video!
Random Everything
Random Everything - 9 years ago
Would you be able to use the rivets to install the zigzag cleat? or are the screws better?
Robert Sauer
Robert Sauer - 9 years ago
This video is really well done. If you follow the directions everything works perfectly. The anchor trolley was easy to install and works very well.
Jim Goat
Jim Goat - 9 years ago
Great product and great video.  I just got my Jackson Cuda 14 set-up in about the time it took to watch the video.
Joseph Quintiliani
Joseph Quintiliani - 9 years ago
This video is awesome, it made the install super easy for me. Can't wait to try it out next weekend.
Johnny Blevins
Johnny Blevins - 9 years ago
Does the surface where you mount the pulleys have to be completely flat? I have a Tarpon 100 it is rounded on most of it's surface's..
YakGear Inc
YakGear Inc - 9 years ago
Johnny, the surface does not have to perfectly flat but the flatter the better.  Think about it this way: the pulleys are pretty small.  On the Tarpon 100 it looks quite rounded but you can find 2 inches of relatively flat surface area for installation.  Email socialmedia@yak-gear.com if you want to get into some rigging talks about how to get your Tarpon 100 set up.
Hunter Farris
Hunter Farris - 9 years ago
Thanks for the info!
Hunter Farris
Hunter Farris - 9 years ago
Wouldn't the anchor line be pulling on the pulleys in strong winds and what if you don't want all your anchor line out ? Just wondering thanks.
Fj4LiFe23
Fj4LiFe23 - 9 years ago
I use a dive reel with a float and a clip on it to the trolley ring. so you let out the desired amount of line clip it to the trolley then send it to the position you want... also if i need to get off the anchor whether its for a large fish or an emergency I just unclip it from the trolley and the float keeps up the reel so that I can go back and pick it up. 
YakGear Inc
YakGear Inc - 9 years ago
Hey Hunter.  The pulleys do take the force of the wind.  However, if installed properly they will hold up no problem.  Shoot us an email at socialmedia@yak-gear.com if you have any questions. 
Keith James Lapere
Keith James Lapere - 9 years ago
Seeing the secondary cleats etc. i am glad i read the comments below. Knowing it was for show.
As long as the cleat is within reach, is it ok to mount it where ever you want?
Great video!!! Very easy step by step instructions and love the set up.
Thank you!
John Graff
John Graff - 9 years ago
Bill, do I see another double wheel pulley installed just forward of the "heritage" decal?  Is that an additional part you've added as part of the anchor trolley system?  Also just below the seat is there another zig-zag cleat installed?  Thanks
YakGear Inc
YakGear Inc - 9 years ago
Hey John! That kayak is a show kayak for many of our products.  So, some of the products are placed in strange areas just for show.  There is a secondary Zig Zag Cleat mounted near the seat.  There are also multiple drain plugs and cleats installed near the bow.  I think that is what you are seeing.  Don't worry about those in the installation of your trolley!
Robert Wilshire
Robert Wilshire - 9 years ago
Thanks so much for this awesome instructional video! Best one i've seen yet and it will be the one i follow when i install my anchor trolley this weekend!
YakGear Inc
YakGear Inc - 9 years ago
Thanks Robert!
Jonathan Yang
Jonathan Yang - 10 years ago
HOW DO I GET THE ANCHOR OUT IF IT IS STUCK
Willie G
Willie G - 6 years ago
get some scuba gear
Danny Baker
Danny Baker - 9 years ago
+Jonathan Yang Paddle backwards and then pull your anchor loose.I had that happen once.
YakGear Inc
YakGear Inc - 9 years ago
Shoot us an email at socialmedia@yak-gear.com if you have any questions.
YakGear Inc
YakGear Inc - 9 years ago
Jonathan, what do you mean?  We usually just pull our anchor line up.  Don't use the trolley to retrieve the anchor.  The trolley is just for positioning.  When you want to retrieve your anchor, you grab the actual anchor line. 
emmanuel cachia
emmanuel cachia - 10 years ago
like
Trog Lodyte
Trog Lodyte - 10 years ago
I'm sure it's going to be a great product. I'm watching this video because the 1 sheet of instructions quite frankly suck. The illustrations are worthless. Contradiction #1 (I hope this is the only) The instructions say 3" down from deck, Bill has already said keep as high as possible resume. *pause contradiction #2 Instructions say install pad eye 1/2 way between seat area and pulley, video caption says 1/3 from rear. Contradiction #3 hole sizes for the pad eyes bolts vs. rivets. Directions say one thing, video says something else. I think I'll just go put it on! The sheet instructions are absolutely the worst instructions I've seen for any assembly and I've put countless things together via written instructions. Happy fishin'!
Trog Lodyte
Trog Lodyte - 10 years ago
+Yak Gear Inc
Thanks for the response and reason. The product is as expected, excellent. I've used it numerous times in higher flow rate rivers and I wouldn't do without one. The reason for my frustration and perhaps over cautiousness was because I don't think anyone wants to be drilling holes into their kayak unless they are positive it's correct. Fish on!
YakGear Inc
YakGear Inc - 10 years ago
Trog - 
Sorry for the confusion.  The video was out after some redesigns of the product and packaging (instructions).  These contradictions should all be fixed.  However, some product with old packaging will be on the shelves and in the stores.  We will do our best to notify everyone! Thanks for the advice. 
Tatersalad19 Cars
Tatersalad19 Cars - 10 years ago
since i used the rivets on the pad eyes i used the nut and bolts on the zig zag cleat, and had inside access at that point, self tapping screws into plastic is kind of a weak fastening method in my opinion, i also added a washer
lyn perk
lyn perk - 10 years ago
ZBorGaming
ZBorGaming - 10 years ago
Just got mine in the mail today.  Thanks for the video.  Very informative.  I'm ready to install it now!!
YakGear Inc
YakGear Inc - 9 years ago
SWEET!
Croaking Toad
Croaking Toad - 10 years ago
The Old Town Predator series have molded handle fore and aft ... I just use a rope looped through the holes, works fine.  One rope, one steel hoop, and a zig zag cleat, and an anchor. I used 3/8 inch poly rope because I don't like super thin material if I'm fishing in a 25 knot wind.
Laquisha Moore
Laquisha Moore - 10 years ago
thanks a bunch, loved it!!
Oscar Sifuentes
Oscar Sifuentes - 10 years ago
Nice Installation Bill! Thanks for all the tips! 

50. comment for How to Install a YakGear Kayak Anchor Trolley

EmmaNickRi
EmmaNickRi - 10 years ago
Perhaps a dumb question here, but the kit comes with 30' of rope.  Since I don't need all 30' for the trolley system, I guess I should cut the rope for only the amount I need shown in this video and use the rest as my anchor rope?
YakGear Inc
YakGear Inc - 9 years ago
Correct.  We recommend getting it all set up then cutting off the excess.  This gives you a margin for error.  Also, be aware that the rope sometimes shrinks after its first contact with water.  Shoot us an email at socialmedia@yak-gear.com if you have any questions.
J0Gu7
J0Gu7 - 10 years ago
Keep in mind, the rope that came with this kit tended to stretch after being wet, so I had to re vtighten my system to preference, because I was having trouble finding my ring due to the fact that it was sagging deep into the water. (and reaching down under your kayak is not ideal for my kayak)  once tightened, it works great
YakGear Inc
YakGear Inc - 9 years ago
Awesome point! We made sure to call that out in the written instructions.  However, that slipped through the cracks in the video! He's right, folks!
J0Gu7
J0Gu7 - 10 years ago
Best kit out there. I have a 10'  Sundolphin ss fishing kayak, so size and weight is a major issue. this kit is ultralight!!!
YakGear Inc
YakGear Inc - 10 years ago
+Thomas Taccetta Either way! Wetting it can prevent future shrinking after it is installed!
Tom T.
Tom T. - 10 years ago
Thanks for the video.  Should I wet the line before attempting to install it?
Kevin Mast
Kevin Mast - 10 years ago
Thanks Bill.  That was really informative!

Similar videos
for How to Install a YakGear Kayak Anchor Trolley

Kayak

Octopus Caught While Kayak Fishing

59,521 likes 62,303,632 views 13 years ago

http://www.facebook.com/ZeeNorthwest http://www.hobiefishing.com/ http://www.kokatat.com/ http://nextadventure.net/...

Kayak

Kayaking Down an Escalator

179,369 likes 29,764,739 views 10 years ago

Basketball, Golf, Kayaks, Soccer... and Ryan Tannehill? Game on. ----------------------------------------­ ► PLAY our...

Snorkeling

♫ I LAVA YOU ♫ Kids Scuba Diving & Kayaking...

45,318 likes 13,735,531 views 9 years ago

This is a SUPER FUN vlog from our 3rd Day on the Island of Maui, Hawaii! This is only PART 1 of DAY 3! The Kids go...

Kayak

Kayak levantado por ballena en Puerto Madryn,...

17,638 likes 7,381,041 views 10 years ago

una tarde increible, mucho sol, kayak y ballenas. Mientras mirabamos desde arriba del kayak, una de las ballenas si...

Kayak

Humpback Whale Breaches on Top of Kayakers

4,561 likes 6,310,163 views 9 years ago

On our 08:00 am Sanctuary Cruises whale tour, just outside the harbor in Moss Landing, two kayakers on a tandam kayak...

Kayak

Kayak Fishing: Offshore Trip Gone Wrong - Part 3

11,895 likes 5,463,949 views 11 years ago

This was my first shark from the kayak, and after spending 5 minutes trying to remove the hook with pliers and being...

Related videos
to How to Install a YakGear Kayak Anchor Trolley

Kayak

Octopus Caught While Kayak Fishing

59,521 likes 62,303,632 views 13 years ago

http://www.facebook.com/ZeeNorthwest http://www.hobiefishing.com/ http://www.kokatat.com/ http://nextadventure.net/...

Kayak

Kayaking Down an Escalator

179,369 likes 29,764,739 views 10 years ago

Basketball, Golf, Kayaks, Soccer... and Ryan Tannehill? Game on. ----------------------------------------­ ► PLAY our...

Kayak

Kayak levantado por ballena en Puerto Madryn,...

17,638 likes 7,381,041 views 10 years ago

una tarde increible, mucho sol, kayak y ballenas. Mientras mirabamos desde arriba del kayak, una de las ballenas si...

Kayak

Humpback Whale Breaches on Top of Kayakers

4,561 likes 6,310,163 views 9 years ago

On our 08:00 am Sanctuary Cruises whale tour, just outside the harbor in Moss Landing, two kayakers on a tandam kayak...

Kayak

Kayak Fishing: Offshore Trip Gone Wrong - Part 3

11,895 likes 5,463,949 views 11 years ago

This was my first shark from the kayak, and after spending 5 minutes trying to remove the hook with pliers and being...

Kayak

Black Bear Gnaws on Delta 15s Seakayak in Berg...

14,518 likes 5,416,453 views 9 years ago

@MerryChirps on Twitter and @MerryMaryMix on Instagram During a solo kayak trip, intended to go from from Ketchikan,...

About How to Install a YakGear Kayak Anchor Trolley

The "How to Install a YakGear Kayak Anchor Trolley" video is part of the kayaking category, which contains similar videos like this one.

Subscribe hot viral Aquatic videos!