My Tarpon 120 Fishing Kayak

ADVERTISING

LuxoGear Emergency Whistles with Lanyard

Shop now »

NOCO Genius GEN5X2, 2-Bank, 10A (5A/Bank) Smart Marine Battery Charger

Shop now »

RHINO USA Boat Trailer Transom Straps (2PK)

Shop now »

LUCKY Kayak Portable Fish Depth Finder

Shop now »

Seaview 180 V3 Full Face Snorkel Mask

Shop now »

Most popular comments
for My Tarpon 120 Fishing Kayak

Live comments
Comments on YouTube

Rick Stuckey - 6 years ago

Trillest kayak ive ever seen...wow its like MacGyver and mr gadget made that... nice job man

SwitchbackXThunter - 6 years ago

What an excellent setup! Whoever the dislikes were on this video are just jealous. Thanks! Subscribed and notifications turned on!

Bart Lasky - 6 years ago

Found you by accident GREAT video thanks!!

Buck Tales from NH - 6 years ago

Very nice, well thought out set-up. I’m thinking you must be an engineer or maybe an electrician by trade and now I can see why the video and audio quality of your videos is really a cut above. Really enjoying all your videos, excellent stuff.

rickt1951 - 6 years ago

By far the best mod video I've seen awesome yak, but can you fish? lol.Enjoy your time on the water.

Brandon Migliore - 6 years ago

Does changing out the screws create any issues with the new ones fitting in tightly? Really like the clean touch changing over to black gives the boat.

Brandon Migliore - 6 years ago

Thank you!

NDYakAngler - 6 years ago

As long as you use the same size, length, and preferably head shape they’ll fit the same as the old ones. Most of mine were 10-24, 10-32, or 1/4-20 but I removed one from each piece of hardware on the kayak to measure length and be sure I got the right size and thread pitch, then made a list of everything I’d need to replace them. Black oxide coated stainless steel is hard to find but Albany County Fasteners had a great selection and you can get as small of quantities as you want. They also have a diagram for each screw type to make sure you measure the length correctly as it varies between different styles of screws.

Brandon Migliore - 6 years ago

Great work! Do you by any chance sell the round pieces you machined for the rudder line screws?

NDYakAngler - 6 years ago

Duluth Trading Co and the Container Store both have them.

fishing Mike - 6 years ago

Dude you like MacGyver

10. comment for My Tarpon 120 Fishing Kayak

Da Su - 6 years ago

The nerdiest video I have seen in some time and absolutely love it. You gave me some good ideas what I can do with my kayak. Keep up the great work

misol123 s - 6 years ago

Hi NDYakAngler. Just watched your latest Video “MN Fishing Opener 2018”. Looks like a fun time out on the river. The current was really flowing!

I have a question for you about your setup. How did you attach the right sided anchor cleat to the track system? I have a similar cleat that requires drilling holes and bolts to secure the cleat—would prefer to install in the same location as yours on the existing track. Did you modify the cleat?

Thanks

Mike

misol123 s - 6 years ago

NDYakAngler Ok will do. Thanks

NDYakAngler - 6 years ago

Hey Mike, you can email me if you want. Ndyakangler@yahoo.com

misol123 s - 6 years ago

Thanks NDYak Angler. That sounds like a great solution. I will give it a try. I have other questions for you if thats OK. Would you like me to continue using the comment section or should I PM you? Thanks. Mike

NDYakAngler - 6 years ago

Hey Mike, I didn't have to modify the cleat itself but I had to make a few things to install it. The cleat came with two countersunk holes already molded into it. I found a 10-32 hex drive machine screw with a flat head fit perfectly flush with the surface so that's what I decided to use. Slide trax accessories use a 1/4-20 screw so I had to make my own square nuts to fit inside the slide trax rail. I used a strip of 1/8" aluminum and tapped 10-32 threads to work with the screws I wanted to use. I noticed the plastic on either side of the rail was slightly higher than the rail itself so to prevent cracking the cleat I made a strip to sandwich between the two. I used 1/8" ABS plastic I had on hand, the width of the rail by slightly less than the length of the cleat with holes drilled to match those on the cleat.

Ronnie Sandifer - 6 years ago

I think you need some sponsers to give you some free equipment. 13k subscribers and audio and video quality is top notch!

The Bearded Sportsman - 6 years ago

Great attention to detail goes a long way! Nice setup!

Carpblood River - 6 years ago

Any Changes to the Set up for 2018?! You should do a “pre season” update. If Spring ever shows up...

NDYakAngler - 6 years ago

I haven’t really changed anything since my last setup video a couple years ago. I might have to do a pre season update video though. I’ll know more in a couple weeks!

DANGER CLOSE USA | BLUE COLLAR AMERICAN - 6 years ago

Just starting out myself. You've given me plenty of inspiration. Thanks for the insight and ideas.

M Kach - 6 years ago

You are an awesome fisherman and I enjoy watching all your clips, Thanks. Question on your AV setup. You have two cameras I assume you are rolling at the same time, you enter them on your timeline in your software and cut to each cam for final render. My question is your audio recorders. Are you using the Gopro mics or are you lining up the recorders in the timeline for cut.
You appear to be a very good producer also. Thanks

NDYakAngler - 6 years ago

Thank you! I record audio directly onto the Zoom H1s and swap it in editing. I tried wiring the H1 mics output to the GoPro but I didn’t like the way the GoPro processed the audio. It didn’t sound nearly as good as having a separate recording.

j rarrieck - 6 years ago

Is that foam in your scupper holes?

NDYakAngler - 6 years ago

Must have been foam from the current going by. I keep the scrapper holes open though.

Jimmy Celtic - 6 years ago

Amazing set up would love to do this

Feon Jun - 7 years ago

Off topic: Would it be possible to just fish off the banks or in water with a wader in this type of river?

NDYakAngler - 7 years ago

Absolutely! I see people do it all the time.

20. comment for My Tarpon 120 Fishing Kayak

graden miller duckworth - 7 years ago

How much stuff do u need for a kyak

4_sons_fishing - 7 years ago

Wilderness Systems is the best! I paddle a Radar 115.

4_sons_fishing - 7 years ago

NDYakAngler it's a great boat!

NDYakAngler - 7 years ago

Nice! I think the Radar might be my next kayak.

Kord Lacroix - 7 years ago

holy crap! man your work is clean. tell me you're an engineer or something?!

DIana Rackow - 7 years ago

Yes I agree you could sell the camera rig, I would buy one today. Come to San Antonio and let's fish the Guadalupe!

DIana Rackow - 7 years ago

Well Let me know if you decide to make the trip! I could show ya'll all the great spots around San Antonio!

NDYakAngler - 7 years ago

I should look into 3D printing or a less time consuming way to manufacture the parts. With all the time spent cutting, grinding, and sanding and the cost of the raw materials I don't think I could sell them cheap enough for there to be a demand. I have a friend from the Dallas area who drives up here every summer to fish. One of these days I'll have to make a trip down to Texas. The bass don't get much bigger than 5-6lbs around here so it would be awesome to have a shot at something much bigger!

Monte Moore - 7 years ago

totally awesome man.... you are quite an engineer.

Derek Bushnell - 7 years ago

I am interested in mounting a Lowrance unit in my Tarpon and was wondering if you had a video available of you mounting one in your Tarpon? Really interested in the way you have the transducer mounted on the inside. Any help would be appreciated greatly. I have watched this one particular video several times reviewing how you have set this kayak up. I don't feel confident in my abilities to mount the transducer inside the hull and it work after hearing horror stories from others about their attempt to do the same thing. You seem to have a handle on it and I would like your advice on the install if possible. Thanks for any help and for the great videos also.

NDYakAngler - 7 years ago

I don't have a video of the installation but gluing the transducer down is pretty easy. Just scuff up the area on the hull where it will be glued down with some 400 grit sandpaper and wipe it with some rubbing alcohol. Then I like to put the glue on the transducer, a thick bead ran down the middle lengthwise so when you press it down it pushes the air out. Then press it in place, run a couple strips of duct tape over the top so it doesn't move and put a brick or something on it to weigh it down. Then let it sit for a few days for the glue to fully dry. Using duct seal instead is another faster less permanent method, its like sticky clay so you just press it down and its good to go.

Heber Rodriguez - 7 years ago

Hi there, nice video and Kayak's Mods/Accessories. I have a question Where can I get that piece of plastic holding the bungee for the anchor trolley. thanks

NDYakAngler - 7 years ago

Thanks Heber! I made that piece myself out of HDPE plastic by using a drill press as a lathe.

PCL Outdoors & Bushcraft - 7 years ago

I really like your anchor trolley setup over what I've seen out there. Any chance you could tell me the trolley brand hard wear setup you used? Was also was wondering if you have ever tried a skeg for it?

NDYakAngler - 7 years ago

I used Ronstan and Harken pulleys and mostly Yak Gear components although some of it is custom made. Never tried a skeg. I really don't even use the anchor much, mostly for fall fishing when the smallies move into the reservoirs and the wind is blowing.

PCL Outdoors & Bushcraft - 7 years ago

Crazy awesome camera setups. I've got mine on order. I'm wondering how you mounted the pvc rod holders? Any suggestions on what mods to do right away to make life easier?

NDYakAngler - 7 years ago

I used 7/8"OD carbon fiber tube. A small flashlight with a traffic wand makes a good light. My Olight S-10 with the traffic wand is like having a portable cfl bulb.

PCL Outdoors & Bushcraft - 7 years ago

Thanks for the help. What size and length are the CF tubes are you using? I'm looking to make a night safety light mount somehow. Any suggestions for an easy quick night light fix? Cameras are down the road, but are you a machinist? Again thanks.

NDYakAngler - 7 years ago

I made a ramp shaped part out of HDPE and ABS plastic, the PVC rod holders are glued and screwed to that and the whole thing is screwed to the back wall of the milk crate. The milk crate is the first thing I'd do when rigging up a new kayak. An anchor cleat or two will come in handy for a variety of things. Also the little pull strap I showed in this video is something I always have with now. It comes in handy almost every trip whether it's for pulling the kayak over land, tying to a branch instead of dropping anchor, or keeping the kayak attached to me while wade fishing. I did add a carabiner to the opposite end of the handle to make it easier to clip on and off.

drocci7 - 7 years ago

Have you taken a look at the new Radar 115?

NDYakAngler - 7 years ago

Yeah they look pretty nice. I think my Tarpon has another year or two in it though, plus I like how light it is for portaging and some of the tougher launch spots.

30. comment for My Tarpon 120 Fishing Kayak

Sean Boyles - 7 years ago

You are wicked smart and handy. Great job. Just got me a Tarpon. Looking to modify it. Nothing like what you have thought, lol.

Rendezvous - 7 years ago

Great video! You are definitely a detail guy and do awesome work too. Thanks for sharing!

Dave R - 7 years ago

Great video, like the setup. Can you share some info on the transducer install....I am a newbie, but surely want to get some tips.. Appreciate it !

NDYakAngler - 7 years ago

Thanks Dave! I used Marine Goop to glue my transducer down inside the hull. I scuffed up the hull with some 400 grit sandpaper (don't sand the transducer) and ran a thick bead of glue lengthwise on my transducer so that it would push out any air pockets and spread evenly when pressed down. Then I pressed it in place where I wanted it, ran a couple strips of duct tape across the top to hold it steady while drying, and set a couple bricks on top to keep pressure on it. Then you just let it sit for a couple days for the glue to fully dry. Another faster, less permanent method is using G&B duct seal you can find at Home Depot. It's a sticky clay like substance that the transducer will shoot through. Just make a ball of it about the size of a quarter and press it down between the transducer and hull, then add a little more around the outside of the transducer to help keep it in place. With either method the key is to get as little air as possible between the transducer and the hull.

Maine Angler - 7 years ago

Nice high tech boat you have there, you did a great job customizing it! I got a Predator over the winter and just waiting for ice to go out so I can use it. I'm looking forward to using it and figuring out how to set up...and making some fishing videos too, of course! Tight lines.

KayakKam - 7 years ago

22 unliked the vid? Why? Anyways, really great vids of your kayak-rigging and fishing outings man. Those mounts are very impressive Nice job! Picked up a Tarpon myself, looking forward to rigging it up and making vids too. Tight Lines!

thomas chapman - 7 years ago

Just bought a Jackson Coosa, can't wait for opener to come to mn

thomas chapman - 7 years ago

I wanted to try and get out before season ended. I might have to try and find a lake to do the same to try out the new kayak.

NDYakAngler - 7 years ago

Less than two months now! There's a couple crappie lakes I can't wait to hit once the ice clears too.

surealfishing - 7 years ago

awesome kayak setup. I like the way you power your electronics. very clean and neat installation. you've given me some great ideas for mine. thank you and keep up the awesome videos.

Joseph Diesing - 7 years ago

What voltage converters did you use?

NDYakAngler - 7 years ago

Mine have CPT printed on them. They came from China so who knows if that's a company there or what. Search eBay or aliexpress for 12 to 5 volt converter and you'll find them.

Fish man 1 - 7 years ago

I was wondering how tall you are?because i'm thinking of getting a tarpon 120 just wondering if it's big enough i'm 6 foot 4 220 pounds

NDYakAngler - 7 years ago

I'm 6' and about 190. My foot pegs still have 3-4 notches I can slide them forward though so there should be plenty of room. If that's still not enough the entire track the foot pegs attach to can be removed and repositioned farther forward, you'd just have to drill some new holes.

Joseph Diesing - 7 years ago

Do you have a link to the mics you use?

Joseph Diesing - 7 years ago

I'm leaning towards using an H1 just for the sake of have my hands/body completely free of camera gear. Sounds great!

NDYakAngler - 7 years ago

I use the on board mics on the H1 and record directly to it. I tried running the output to the Gopro but it altered the audio and didn't sound nearly as good. The H1 is sensitive to wind though so a furry windscreen is a must for outdoor use. I also use an ATR-3350 lapel mic occasionally, for the hat cam rig and when it gets too windy for the H1 to handle.

Joseph Diesing - 7 years ago

Oh my bad... I'm currently rigging my setup... I remembered how great yours was. So I was thinking about what type of mic you used (didn't re-watch the video). So you don't actually use an external microphone you just use the one that comes on the zoom H1... Good to know.

Have you ever considered running an external mic, like a shotgun mic?

NDYakAngler - 7 years ago

They're Zoom H1's, I got them from B&H.

Paul Anthony - 7 years ago

By far the best kayak setup I've seen thus far!! I wish I could set up my kayak just as nice as yours!!! Great job!!

Derek Bushnell - 7 years ago

I just bought me A Tarpon and was fixing to start rigging it. Excluding all the camera rigging what is the most important thing you rigged on it that you recommend for me too do. Any help would be appreciated. That net you have also. What brand and model is it thanks??

NDYakAngler - 7 years ago

I'd rig up a crate with some rod holders and tackle storage first. Then probably an anchor trolley and fish finder. The net I have is a Frabill 3672 trout net.

Connor Schork - 7 years ago

I'm 95 percent sure this guy doesn't even have to buy a kayak. he can just make it like everything else

Max Rechkemmer - 7 years ago

Perfection and Simplicity... Well done!

Full Throttle Outdoors - 7 years ago

You did a great job on your fishing kayak mods.

Aaron Brown - 7 years ago

Sweet setup man! Was wondering how you mounted the divider to the crate?

Fred Fable - 7 years ago

Nice rig!...
Ambient mic and light!!

george15 - 7 years ago

Jesus Christ dude you have to patten some of this stuff!! this is the most legit setup ive seen in a long time!! your really selling me on the tarpon 120!

Afflictxd Sniping - 7 years ago

I wish i knew how to power convert my GoPros.......

NDYakAngler - 7 years ago

All you have to do is give them 5v through the mini usb port. The easiest way is with a lithium power pack, as far as I know they all have a usb jack which is 5v so you can just connect the two with the cord that came with your GoPro.

Tyler Rawson - 7 years ago

is the color desert camo

NDYakAngler - 7 years ago

I have the "green camo" color. I think they quit making them in that color but "desert camo" is pretty close.

50. comment for My Tarpon 120 Fishing Kayak

James Mathews - 8 years ago

I'm a professional filmmaker and I'm geeking out over your camera setup. I was wondering why your audio was so good. Do you wear a lavalier mic as well while fishing? Awesome ingenuity. You could market those go pro stands.

NDYakAngler - 8 years ago

Thanks James! Most of the time I just use the H1s to pick up audio with the on board camera rigs. The lav mic does better in wind so I'll occasionally use it on windy days. I also use the lav mic with my hat cam rig which is what I used to shoot this video.

ÖMER ŞAHİN - 8 years ago

Fiyatı nedir dostum what mony ?

GWHAWK87 - 8 years ago

Your camera mounts are truly epic

sperrazza19 - 8 years ago

Those are some really cool and extremely genius ways to do the electronics. Could you do a video on how you made the go pro setup? I would really like to see the work that goes into it.

Casey orr Adventures - 8 years ago

I would like to know everything about your go pro rig...I want to do the exact same thing on my kayak

c fedyszyn - 8 years ago

So the transducer comes out the bottom of the kayak? Do you worry it will get damaged on rocks, etc.?

NDYakAngler - 8 years ago

You just need to glue it to the hull with something like Marine Goop and try not to get any air bubbles between the two. Another less permanent method is Duct Seal from Home Depot. It's a sticky clay like substance so you just put a ball of it on the bottom of the transducer and press it against the hull, then build some up around the outside to keep it in place. I used that method after having to replace my transducer in my old kayak and it worked great!

c fedyszyn - 8 years ago

Thank you. I didn't know that would work.

NDYakAngler - 8 years ago

The transducer is inside the kayak and shoots the sonar through the plastic hull.

Richard Pockman - 8 years ago

How do you get such good audio from the GoPro when using the head strap ?

Awesome video

YakYak - 7 years ago

NDYakAngler what editing software do you use? You can really tell you know what you're doing in editing

NDYakAngler - 8 years ago

I made my own hat cam rig which is what I used to film this video. I clip an ATR-3350 lapel mic to the bill of the hat and run it to a Zoom H1 recorder in my pocket, then swap audio files in editing.

Ken Miller - 8 years ago

Matt - awesome setup and video! I have a couple of specific questions concerning your setup, any chance of sending you an email? Thx.

NDYakAngler - 8 years ago

Thanks Ken! You can email me at ndyakangler@yahoo.com

Damien Weist - 8 years ago

how did you make the divider.

Agustin Chavez - 8 years ago

that is one sick set up you have!!!!

NDYakAngler - 8 years ago

Thanks! I've had it a couple years now and really haven't changed much. It's a great setup for hitting smaller lakes and rivers!

syntaire - 8 years ago

Fantastic video man. Really clean looking custom work.

TheNumber23 - 8 years ago

I'm new to fishing, Why multiple rods?

NDYakAngler - 8 years ago

Rods come in different length, power, and action specs so some are better suited for throwing certain lures. It's good to have at least two rods ready to go, that way if you miss a strike you can follow up with a different lure without having to take time to tie it on.

Sergio Martinez - 8 years ago

that's nice I need to set up my kayak like that. thanks for the ideas

Larry Lebid - 8 years ago

Great video. What is an anchor trolley though? How does it work ?

NDYakAngler - 8 years ago

The anchor trolley is a system of pulleys with a rope looped around them and a ring to run your anchor line through. Most people run them the length of the kayak and it allows you to run the anchor off any position on the kayak. I only used the back portion with my old kayak so that's all I installed here, that way when it's windy I can pull the anchor line to the back of the kayak and it keeps me positioned with the wind behind me.

Larry Lebid - 8 years ago

Been looking at these. Trying to decide on the 120 or 140 version. Did you consider the 140 when you were buying yours?

NDYakAngler - 8 years ago

I didn't really look at the 140. I fish both lakes and rivers so I figured the 120 would be my best bet, a good mix of speed and maneuverability.

Julio Peraza - 8 years ago

You r the man, the day I buy a kayak and need a setup I will look at this video.⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️

NorthernBassAttack - 8 years ago

I live in the same area as well. I was wondering what river that is because the red is to muddy to fish for bass.

NorthernBassAttack - 8 years ago

*too

Garry Brpwine - 8 years ago

What river ?

Hutch's Outdoors - 8 years ago

By far one of the best setups I've seen so far. I'm running the Perception Pescador 120 & just bought a camera. I've seen several comments asking, but I figure I'll give it a shot... Is there any chance you could do a run down video on the electrical charging setup for the GoPros? Flawless job all around!

NDYakAngler - 8 years ago

I need to do that, I get asked about the power setup all the time. I'll have to round up a few things to help demonstrate how to do it but I'll try to get a video made soon.

William Willi - 8 years ago

Where do you buy that kayak ? Nice. How much cost , thinking get one like this , sorry by my bad English Speak Spanish but leave in Ny. Next month I will to go to cabelas may be check a kayak like this , Thanks

NDYakAngler - 8 years ago

I've ordered all mine from Austin Kayak, the Tarpon 120's go for around $950 new. I haven't been to a Cabela's in a long time but they should have a decent selection of kayaks.

Eric Flower - 8 years ago

Great set up! Say have you taken the Tarpon 120 out on lakes or mostly rivers? Im wondering if you would recommend the boat on a lake as well as river fishing? Thanks!

Eric Flower - 8 years ago

Great thanks for the reply!

NDYakAngler - 8 years ago

I use my Tarpon on both lakes and rivers. I've even taken it out on Mille Lacs a few times on calm days. It has good speed for covering distance and it handles choppy water pretty well.

RPTV - 8 years ago

That is one sweet set up. I use a go pro front and back but no external battery. My challenge was the fact that I like to fish but I also like to do some whitewater kayaking. (Level I, II, III) So my go pro mounts had to be either flexible or have a break away feature in case I turn over in the whitewater. I used big washers and a big magnet to create the break away feature. I have a 10' kayak (Lifetime Tamarack) that works well for fishing and whitewater but recently realized that in level III whitewater it filled with water easy and took a while to self drain so I am looking for a new kayak that will still fish well but do a better job in the whitewater. My friends had a Heritage 10' and a Pescador 10' and I guess they just ride higher out of the water therefore do not get filled with water and drain it out faster too. I also noticed that theirs seemed to paddle faster than mine as well. I was thinking about the Tarpon 100 mainly because I have always felt the 12' is to long for whitewater. What are your thoughts and do you know if the Tarpon 100 is a good rig as far as all the things I have mentioned. Speed, not taking on excessive water and draining out quickly?? Thanks

RPTV - 8 years ago

Thanks

NDYakAngler - 8 years ago

I've never had a problem with mine leaking.

RPTV - 8 years ago

Thanks. That is what I was thinking but I think I like some of the features of the Tarpon 100 even though it is about $200 more. Does the hatches on your 120 leak bad when swamped??

NDYakAngler - 8 years ago

Thanks Rickey! That's a great idea with the magnet for a break away mount! My paddling experience is limited to my Tarpon 120's but I have a friend who has a 100. It's not as fast as the 120 but it does ride a little higher in the water. Both have the same scrupper holes and mine always seems to drain out almost instantly when I get swamped going over a dam. The Tarpon 100 should be very similar to your friends Pescador, they're basically the same hull.

Biking&Jeeping - 8 years ago

How does the 120 do on smaller/faster moving rivers? I am looking at the tarpon and the aspire for here in NC. Trying to decided on sit on top or sit in.

NDYakAngler - 8 years ago

The Tarpon does really well on rivers. I have no problem paddling mine up to this spot, farther upstream it gets too rocky though. The problem I run into is those spots where the current picks up it generally gets shallow and if you're in less than 8" of water it gets tough to put any power behind your paddle stroke without bashing the blade into rocks. Those two kayaks would be pretty similar paddling against current though, maybe a slight edge to the Tarpon with its longer more aerodynamic hull but the Aspire will be easier to maneuver.

Brian Stewart - 8 years ago

how were you able to conceal the power cable and the transducer cable from the fish finder

NDYakAngler - 8 years ago

The base for the fish finder has a hole in the middle to run the cords through the bottom and I drilled a hole in the mounting location on the kayak so I could run them straight down to the inside. I had to drill something like a 1/2" hole to fit the plugs through so I figured how much cord I'd need on the top side and wrapped a thin strip of duct tape around both cords together in the spot where they'd come through the kayak plastic so it was a snug fit in the hole. Once I had the ff base mounted I filled the opening in the middle where the cords pop through with marine goop to keep them in place and prevent any water leaks.

surethingsfly - 8 years ago

Amazing kayak. The attention to detail is exquisite, well done to you! ATB.

ND Outdoors - 8 years ago

nice yak how did you get the cap off the net to change the bunge. i have the same nat and i am wanting to do the same thing

ND Outdoors - 8 years ago

Ok thanks I will try to do that

NDYakAngler - 8 years ago

The first one net I did was pretty easy, I'd already used it for a year so the glue was starting to come undone. All I had to do was yank on the bungee and the cap popped off. The second time around I did it with a brand new net. I had to pry at the cap with a big flathead screwdriver while pulling on the bungee.

solarjinx - 8 years ago

This is the most professional kayak setup (and youtube video) I've ever seen. Hat's off to you, sir.

Ron B - 8 years ago

Very nice kayak. How do you do that on a river paddling and fishing at the same time? Must be a circus act.

NDYakAngler - 8 years ago

Thanks! The water at this spot is a little shallow and fast compared to most areas of the river I fish. Here I'll usually hop out and wade fish around the rocks. In slower moving water the kayak sits still pretty well if you have the front end pointed into the current, plenty of time to get in a cast or two before I start drifting back.

Deuce - 8 years ago

dang, very nice, love it. I'm new to kayak and am searching what to install and buy. Thinking of getting the "Cabela's Advanced Anglers™ 120 Fishing Kayak" so seeing different kayaks and style are nice for a start before i makeup my mind. any suggestion on what to get?. also subbed.. :)

NDYakAngler - 8 years ago

It's good that you're doing some research before buying, there's a ton of different kayaks to choose from these days. It's all about finding one that suits the type of fishing you'll be doing. I like my Tarpon because it has good speed and is great for paddling against river current. I wouldn't mind picking up something a little wider I can stand up on for fishing lakes though. The Pelican Catch 120 is one I've been looking at, Fleet Farm has them on sale for 699 right now. It's kind of similar to that Cabela's one your looking at which also looks like a great kayak.

The Bopper - 8 years ago

Dude! That yak is buttoned up! The average Joe could never set that up. What do you do for a living??? You have some skilled construction goin on there. Very nice.

S. Stallone - 8 years ago

There hundreds of tutorials on YouTube to teach you how to rig a kayak.
That's how I learned. :)

NDYakAngler - 8 years ago

Thanks! I grew up playing with Lego's and tearing apart any broken electronics to see how they work. That's probably where most of my building skills come from. I drive a delivery truck around the northern part of ND a few long days a week. Most of the planning and ideas for the camera rigs were thought up as I was cruising down the highway between stops.

StandsWithABeer - 8 years ago

Most excellent...I like the LEGO idea; you setup is very smart--thanks for sharing. Subbed.. :)

NDYakAngler - 8 years ago

Thanks! I was a lego-maniac as a kid, that's probably where I get a lot of my building skills from!

Mikehawks92 - 8 years ago

Where did you get your kayak from?

NDYakAngler - 8 years ago

I ordered both of mine from Austin Kayak. They took about 4 business days to show up on an Estes truck.

Greg Lewellen - 8 years ago

You are a true craftsmen that's for sure.

Neil Bruchu - 8 years ago

great video! learned a ton. I wish I could send my kayaks to you!!!

zootedsuit - 8 years ago

I would strongly recommend a paddle leash. Your paddle can always take a dunk when you least expect it, then you're in a world of trouble. For about $15.00 you can get that extra little bit of insurance. Also, if you happen to hit a rock or something & dunk yourself at least you can stay connected to your yak if the paddle is in your hands.

Pete Larson - 8 years ago

You did a bang up job on those camera mounts. Love it!

40oz - 8 years ago

Where did you get the black hardware? What about the stick grip?

40oz - 8 years ago

Thanks for the feedback. I recently purchased a Tarpon 120 because of your vid. I love it so far, but looking to upgrade soon.

NDYakAngler - 8 years ago

I got the screws from Albany County Fasteners. Black oxide coated stainless isn't easy to find and they're the only place I've found where you can order whatever quantity you need. The Conseal grip pads I got from Hook1.

prep 787 - 8 years ago

do you remove the camera battery the one the camera has when you use the 12v battery

prep 787 - 8 years ago

+NDYakAngler thanks very helpful

NDYakAngler - 8 years ago

No, the Gopro battery stays in. I use a power converter to send 5v to the Gopro so its basically the same thing as having it always plugged into a charger.

Charles Hall - 8 years ago

Very nice rig. Great video!

Meinsnailen - 8 years ago

I made a dolly, copied a design I saw on you tube, I'm skeptical as to how much it will handle but we'll see.I have a few more questions for you.Did you make the anchor cleat as I can't find one like it.Also I can't find a nylon ring or 3/4" HPDE.If you have time to answer then great, thanks

NDYakAngler - 8 years ago

The only thing I really sketched out on a planning pad was the part of the front camera mount that holds the copper pins and magnets, just to make sure everything would fit. Everything else was either planned out in my head or built to fit for a specific purpose. One thing that would definitely save a lot of work on the crate camera rig would be to just have a long enough cord from the power converter to wrap up around the camera pole and to the gopro once it's in place. If you want you can shoot me a PM with your email or get a hold of mine on my main channel page and I can take some pictures and measurements and send them to you.

Meinsnailen - 8 years ago

Thanks for the reply.
I did get to the YAK GEAR site and found the cleat anyway. Thanks.
No nylon ring as of yet.
By the way if you were to provide to me detailed drawing and/or steps re: your camera systems I would be willing to pay you for them... It's just a thought.
Of course you may enjoy having the one of a kind Kayak and I don't blame you.
Although I am in another country, lol.

Anyway thanks again, back to tinkering.

NDYakAngler - 8 years ago

The nylon ring and mini zig zag cleat are both made by Yak-gear, I ordered both from Austin Kayak. I made a spacer from a 1/16"*3/4" strip of aluminum to go between the cleat and slide track rail and another piece of 1/8"*1/2" aluminum with holes drilled and tapped for 10-32 screws went into the track to screw the cleat down to. I get my HDPE from TAP Plastics. The stuff I use is called King Starboard. There's a minimum of $10 per piece for cut to size so you can play with the dimensions to get the most for your money.

Benito Mussolini - 8 years ago

how much did the Kayak alone cost?

Benito Mussolini - 8 years ago

+NDYakAngler ok thanks a ton!

NDYakAngler - 8 years ago

I think the Pelican Catch 120 is one of the best deals for a sit on top kayak right now. $750 new and they have a nice folding chair style seat and are supposed to be plenty stable for standing on. The Pelican Strike and Perception Pescador are a couple more lower priced SOT's. Sit inside kayaks are quite a bit cheaper, lighter, and easier to transport but for fishing I'd definitely recommend a sit on top. You could try checking Craigslist for used kayaks for sale too or if you have anyplace nearby that rents them sometimes they'll have some used ones for sale.

Benito Mussolini - 8 years ago

+NDYakAngler Thanks, what would you suggest for a first kayak that would be used for fishing that a teenager could use, and save up for?

NDYakAngler - 8 years ago

New Tarpon 120's are usually priced at $939.

CatDaddy Blue - 8 years ago

Are you making this stuff in a machine shop or by hand? That is a little OCD'ish, but I like it the details in your work sir. I have watched about all your videos. I guess I am a fan now. Thanks!

NDYakAngler - 8 years ago

I made all of this with pretty basic power tools, a drill, jig saw, dremel tool, and a cheap drill press. Luckily HDPE plastic is easy to work with.

uzername1nvalid - 8 years ago

My goodness, all of that is super impressive and detailed. Seems like you put a lot of work into it and your videos are reaping the benefits. Nice job!

Brett Johnson - 8 years ago

What a great video! I just got a Tarpon 120 a few weeks ago. Your video has really got me think about how to rig it. Thanks!

klok95330 - 8 years ago

do a video about the electrical set up you got.

just bought a brand new 2016 malibu x factor. not a single thing in it yet. hasnt even seen water. need ideas.

mojo jojo - 8 years ago

what an awesome set up! I wish I had your ingenuity and skill

Landon Tanner - 8 years ago

I'm looking at buying a sun dolphin excursion fishing kayak. When I get it I would like to add some modifications to it for better fishing. Can you give me some tips. Thanks!

Jeremy Pollock - 8 years ago

Truly jealous. I wanted a tarpon, but my truck broke down so I wasn't able to get it yet. soon though. Happy Fishing.

NDYakAngler - 8 years ago

Bummer man, hopefully your luck will swing back the other way. I'll catch one for you this weekend!

Trippy Hippie - 8 years ago

thats a sweet setup. nice modifications to the Yak.

Meinsnailen - 8 years ago

Thanks for responding.Given what I've seen from your videos I'm surprised you didn't make a remote controlled dolly for your Tarpon. I just purchased the Tarpon 120 Angler yesterday. Your "My Tarpon 120" vids were instrumental in my decision process.It's hanging in the garage calling me, I may have to throw it in the pool just so I can get into it on some water.There are so many lakes and small tributaries in this area to tour and fish, many of which I will have only a path by which to gain water access.Just wondering if its worth making my own dolly or buying. I'll check out the both options.All the best.

NDYakAngler - 8 years ago

It's a tough call on buying or making a dolly. I got mine on sale for around $50 so that made the decision a little easier for me. I was also a little concerned about puling a homemade pvc one over rough terrain and having it break if I hit a bump too hard. I haven't used it yet but I've been checking out a couple spots on Google maps I might need it to get to this summer. Most of the time I can get away with pulling my kayak with a pull strap if I cant get close enough to the water. Grass, dirt, and sand won't do much harm to the hull if you have to pull it a short distance.

100. comment for My Tarpon 120 Fishing Kayak

Meinsnailen - 8 years ago

What sort of dolly system do you use?

NDYakAngler - 8 years ago

I have a cabelas brand one sitting in my garage, haven't had to use it yet. Every place I fish has a public launch or a spot to drive close enough to the water so I'll set up right where I plan on launching.

Meinsnailen - 8 years ago

I wish you were my neighbour!
You have some significant skills there buddy.
Great video.

Hunter Frymire - 8 years ago

U should sell me ur kayak

Jason Deen - 8 years ago

That is a really nice setup!

BayouBassKing - 8 years ago

Any chance you could do a video on your H1 settings you use when recording out on the water?

BayouBassKing - 8 years ago

+NDYakAngler Wow thanks for all the information man, I really appreciate it. I'm getting ready to pick up a Sony a5100 and want to record audio separately and lay it over my videos later. Really considering picking up the Zoom to do this. The audio quality on your videos is outstanding. I've always admired that on your videos. Looking forward to more videos from you!

Thanks again!

-BBK

NDYakAngler - 8 years ago

I've been meaning to do something like that. I've been so busy at work lately my main goal right now is to just hit the water and catch some fish lol. I'll be getting more time off soon though, just as the pre spawn bite should really start heating up. I'll give you a few tips on the H1 until I can get a video made. I keep mine set to 44kHz/16bit/WAV. My video editor outputs the audio in 44/16 so I like to keep the Zoom at those same settings and WAV will give you better quality than mp3. The auto level and low cut switch on the back I turn off and take care of that in my audio editing program. For the input level I'll keep mine around 70 with my kayak camera rigs. I'll adjust it for other situations, you basically want it set as high as you can without ever having the red peak light come on. Once I get back home and dump all the files onto my computer I'll take the ones I want to use and open them in my audio editor. The first thing I'll do is boost the master gain by around 18db to increase the volume. Next I run an EQ on them, mostly just a high and low pass filter. I'll set the high pass around 85Hz with a 48dB/octave slope to get rid of a lot of the wind noise. The high pass I set around 10.5kHz, also with a 48dB/octave slope to get rid of some of the recorder noise and high end harshness. After those steps there will most likely be several spots that will "clip" or cause distortion. Usually high frequency noises like smacking rods against the kayak or fish jumping, you'll be able to see these spots on a wave chart by looking for any peaks that go above or below the 0dB reference line. These need to be toned down back below the 0db line to prevent distortion so I'll zoom in and highlight those areas to decrease the volume. This is usually the last step I'll do before rendering the track to swap into the video. It can be a little time consuming so I wait until I get all the files lined up and cropped in my multi track mixer to tone down those loud spots, that way I'm not doing it on parts of the audio files I wont end up using. One more thing I'd recommend if you plan on using the H1 a lot, especially on longer outings, is to invest in a set of the white label Eneloop batteries and a charger. You can probably get a set of four and charger for under $20. I'll get around 8 hours record time on Eneloops compared to maybe 3-4 on alkalines. They can be charged something like 2000 times too, I'm still on my original set of four I picked up in 2012 and they get a lot of use. A lapel mic is good to have too, mine does a lot better on windy days than the Zoom's on board mics. I use a cheap Audio Technica ATR-3350 and it works great. They work best with the Zoom if you cut out the battery holder part and solder the wires back together without it. It will run hotter with the Zoom's built in power supply. Lapel mics only pick up one channel so there is an extra step in editing to switch it to both channels.

Brett Ciupka - 8 years ago

What is the cost of this kayak? Also nice video can't wait for more.

NDYakAngler - 8 years ago

You can get a new Tarpon 120 for around $950.

5 Year Plan - 8 years ago

SWEET set up. I've been fishing from a Pungo 120 sit inside. This video has helped me make up my mind for my next one. The only thing stopping me is I dont know how dry you stay in the Tarpon. I do alot of spring fishing when the ice isnt all the way off the lakes. I dont mind water from the paddling or catching fish....but how dry do you stay when just regular lake fishing with a slight chop? And does water shoot up when you cross boat wakes? Thanks for the video and you time!

5 Year Plan - 8 years ago

+NDYakAngler sounds great! Thanks for the info.

NDYakAngler - 8 years ago

I stay pretty dry in my Tarpon, other than getting splashed by fish. As long as the wind is under 15mph it doesn't get choppy enough that I get sprayed by waves as I paddle along. If the wind is stronger than that I'll usually stay home or try to find a calm stretch of river to fish. I've paddled through white caps on several occasions though and as long as I hit them at the right angle I'll stay dry. The Tarpon hill as a couple scrupper holes under the seat that come plugged from the factory. Mine popped out at some point but I didn't bother putting them back in. Only twice I've felt water come up and soak my seat. Once was when I took the kayak over a small dam, the other time some a-hole in a bass boat flew by about ten feet in front of me and water shot up under the seat as his wake passed me.

NDYakAngler - 8 years ago

I always take the battery out at the end of the day. The battery box is glued to the hull inside the front hatch so all I have to do is open the lid and pull the terminal clips off the battery to remove it, only takes a few seconds. My kayak sits on it's side on my trailer so I don't trust the battery box to remain glued in place if I leave the 7lb battery in it while in transport. I also keep my trailer and kayaks in a storage garage so I don't have a power outlet to plug a charger into. If circumstances were different though I'd definitely add a plug I could easily hook a charger up to.

PhishNOut - 8 years ago

Do you typically use all Mono or Flouro on your rod setups?

NDYakAngler - 8 years ago

Almost all my reels are spooled up with Trilene Sensation mono. I've been using it for a few years now and really like that line. I tried fluorocarbon for a season and had too many problems with it.

z Trubble - 8 years ago

Best modifications I have seen yet. Very nice job

Mark s - 8 years ago

Z. A. A. Ss. A z. ZZZZzzzzzzzzzzz X z. Z

Pawel Sawicki - 8 years ago

that camera rig is something you should patent produce and sell. nice job.

Zach Howard - 8 years ago

I understand this video was made quite a while back now but I must say that as an engineering student I was very impressed with how you made your gear you've done very well!!

NDYakAngler - 8 years ago

Thanks Zach! I've only had this kayak for a year now but everything has worked great so far!

Gavin Williamson - 8 years ago

what mics do you use

NDYakAngler - 8 years ago

The two camera rigs on the kayak have Zoom H1's. I used my hat cam rig to film this video, with that I'll still use an H1 to record but I'll plug an Audio Technica ATR3350 lapel mic into it and clip it to the bill of my hat.

NDYakAngler - 8 years ago

Thanks! This setup has worked great! This was the first winter in about 5 years I haven't had to do any new mods to the kayak.

Dave Cavanaugh - 8 years ago

What model/size paddle are you using?

NDYakAngler - 8 years ago

It's a 240cm Bending Branches Angler Pro.

The Furrminator - 8 years ago

My son has a kayak and he's been trying to talk me into getting one, I really like your setup. Thanks for the detailed video. I'm now a subscriber.

NDYakAngler - 8 years ago

Thanks Jeff! I'd highly recommend getting a kayak, it's a blast paddling around and exploring lakes and rivers! I'm looking forward to getting mine back out as soon as we get some warm spring weather.

Mark Linder - 8 years ago

Hey Matt as a fellow river smallmouth chaser I've watched most of your videos. Keep up the good work. Great rigging on that Tarpon man. I. Looking to buy a 130X after they become available. Definitely going to copy some of your ideas. Thanks again

NDYakAngler - 8 years ago

Thanks Mark! I've got my eye on the 130x too. I think I'll give the Tarpon another year or two but the 130x will probably be my next kayak.

Sonny Sullivan - 8 years ago

huge props on your camera set up! I can tell a ton of time went into getting that the way you want it. Would love to see some night time shots from this year and if you are doing any more mods film the build process. Fish on!

NDYakAngler - 8 years ago

Thanks man! The only problem with the light is it draws a lot of bugs so I use it mostly for a navigation light while I'm moving. I might have to try a night bit for some walleye this spring though before the bugs get too thick. I'll have to experiment with some colored lenses over the light this summer too, maybe I can avoid drawing them in. I haven't made any other changes to the kayak yet. I'm thinking about getting a micro power pole for cat fishing but I'm not sure if I'd put it on this kayak or the orange one.

Debby Bruno - 8 years ago

All of your videos are A-1. Getting my first yak in a couple of weeks and extracted some nice ideas. Thank you!

Bren Wyatt - 8 years ago

Some serious engineering !!! Very impressed !!

Lucas Balistreri - 8 years ago

Just ordered mine for this season of catfishing. Awesome video and set up! Can you give me some information on the fish finder rig I want to shoot through the haul as well.

Lucas Balistreri - 8 years ago

awesome thanks!

NDYakAngler - 8 years ago

I just used the transducer that came with my humminbird 386di. Side imaging is about the only thing that won't work through the hull. I used marine goop to glue mine down. Squeeze a good size glob of it on the bottom of the transducer and press it against the spot on the hull where you want it, trying not to get air bubbles in the glue in the process. I kept mine from sliding around with a few strips of duct tape and added some weight on top of it to keep it pressed down while it dried. I let my kayak sit still for a few days to make sure the glue dries completely.

Phillip Kolesinski - 8 years ago

Hey man love your videos, getting my own fishing kayak soon and I was wondering with the transducer glued on the inside of the kayak with marine glue have you had any problems what so ever? And did you have to drill holes in your kayak to get the battery wires hooked up to the fish finder? Also what marine glue do you recommend? Thanks

Phillip Kolesinski - 8 years ago

+NDYakAngler Thanks man I really appreciate the info. Keep up the awesome work you have the best yak videos on youtube!

NDYakAngler - 8 years ago

It's still pretty accurate. I've compared readings to a few transom mount units and mine was always within 1-2 degrees. It will take a half hour or so after launching sometimes for everything to acclimate to the water temperature so it might be off a little bit at first.

Phillip Kolesinski - 8 years ago

+NDYakAngler awesome thanks for the response. With the transducer being inside the kayak also do you still get accurate water temp readings?

NDYakAngler - 8 years ago

I used Marine Goop to glue in the transducer and to seal around the wires where they go through under the base of the fish finder. I did have to drill a hole to run them through. That mounting spot is a pretty standard size so it would be easy to cover it with something if I ever wanted to remove the fish finder. The only problem I ever had was with my other kayak, the transducer went out after a few years which isn't uncommon. I was able to pry the old one off and remove the rest of the glue stuck to the kayak when I replaced it.

Disciple - 8 years ago

I don't own a yak, never thought about getting one but your setup made me want to get one

Thystaff Thywill - 8 years ago

+BluGladiator Depends on what you want. I think doing to some online research and figuring out what you want out of it will help you the most. Then going to an outdoor outfitter where you can try out or rent a few kayaks would help too.

Disciple - 8 years ago

+Thystaff Thywill if I were to look, which are good models?

Thystaff Thywill - 8 years ago

I think a kayak is better. You can get in places no standard boat or bass boat can get to. Plus they're cheaper to maintain. I don't think I would go as far as this guy did with the fish finder, but I would rig up a fish basket.

Just Fishin513 - 8 years ago

Very nice work. Great video

Marc Duncan - 8 years ago

Hands down the slickest Tarpon I have ever seen. I have a Pre-08 T140 (rubber front hatch, no gear tracks...) that I'm getting rigged now, and you have really given some inspiration! Also, as a test electrician, and electronics tech for 16 years I have to say bravo on your on-board power system for the cameras and FF-very clean install, my man.

NDYakAngler - 8 years ago

Thanks Marc! A lot of planning went into this setup, probably more time spent brainstorming than actually building. I think the hardest part was coming up with ways to machine some of the plastic parts with the limited power tools I have. I couldn't be happier with how it turned out though, I haven't changed a thing since shooting this video and I plan on keeping everything the same for this season.

DeOnna Williams - 8 years ago

Awesome kayak...When did you start kayaking and when you started did you start by going out on paddle rides and getting comfortable with the kayak and different water situations before fishing?? Or did you just take one rod and kinda went for it??

NDYakAngler - 8 years ago

Thanks DeOnna! It's been five years now since I got my first kayak, the mango color Tarpon 120 in my videos from before last summer. I planned on fishing from it and received it around this time of year so while I waited for the lakes to thaw out I got my first milk crate built with some rod holders and installed a fish finder and anchor trolley. The first trip out I went to a small pond with a friend who also just got his first kayak. I was a little worried about tipping so I packed light, just one fishing rod and I made sure to tie a leash to all my gear that could be lost if I flipped. The kayak was a lot more stable than I thought it would be. It only took about 5 minutes to get a feel for it and the thought of falling in disappeared. The only time I've ever gone in since then was last fall when I was standing on it in some river current and lost my balance. One thing I'd recommend doing once the water is warm enough is to take the kayak out to a shallow spot with just a paddle and a pfd and intentionally flip it a few times to test its limits and try a couple re-entry techniques.

Capt Mike - 8 years ago

do you get water pooling under the seat? I do

Capt Mike - 8 years ago

+NDYakAngler thanks, I must have not unplugged it

NDYakAngler - 8 years ago

I've never had that problem. The scrupper holes under the seat come plugged from the factory, the plugs in mine must have been knocked out at some point. When I paddle through a big wave or go over a dam water will splash up through the holes sometimes and get my seat wet. I'm not sure if you can completely remove those plugs without taking the seat off but you could probably pop them out through the bottom with a stick or something. I'd only do that if you mostly use it on calm water though, anything really choppy and you'll get water splashing up through the holes.

Grant Brugger - 8 years ago

Thought that you may like this being the electronic guru you seem to be. Would be cool to add on to each side of the front of the yak to have some great light for night fishing. Waterproof system you could integrate into your existing battery ..

https://www.kickstarter.com/projects/zyntony/ra-worlds-first-strap-light

KB Sculpt - 8 years ago

do you plug the scupper holes in the back cargo area? i'm going to start fishing on my 120 and I assume you plug the back?

NDYakAngler - 8 years ago

I leave them all open. The water level is still well below the top with all my gear loaded up. Some water will come up if it's really choppy or I tilt one way or the other but it drains back out when I'm level again. The only time I might throw them in is if I'm paddling through a lot of scum and surface weed mats. I've been in that stuff a few times when a water bug hatch was going on and they climbed up those back holes and pretty much covered my milk crate.

Osman Akhmedv - 8 years ago

Hey man very nice, may i ask how much cost that kinda Kayak?

Osman Akhmedv - 8 years ago

+NDYakAngler Ok Thanks Man

NDYakAngler - 8 years ago

If you have any sporting goods stores that sell kayaks nearby they'd be worth checking out. During winter they'll often have them on sale to make room for the new kayaks coming in this spring. The Scheel's sports store here had my Tarpon 120 for $699 last winter, although color choices were limited. Both of mine I ended up ordering online from Austin Kayak. They have them listed at MSRP but when you add them to the cart it deducts $60, which is about what they charge to have it shipped so it basically works out to free shipping. ACK does a package deal that adds a cheap paddle and a decent NRS pfd too which for $30 more is worth it just for the pfd.

Osman Akhmedv - 8 years ago

+NDYakAngler Hm like frm where? online or some story

NDYakAngler - 8 years ago

Thanks! A new Tarpon 120 kayak retails for $939, although this time of year you might be able to find one a little cheaper.

Pedro Velez - 8 years ago

nice!!

Pushnlbs7 - 8 years ago

Are you an engineer by occupation? ;)

NDYakAngler - 8 years ago

I'm just a part time garage engineer lol.

braveswin1 - 8 years ago

God damn, dude...you're Batman!!!

Sweet mounts and electrical setups. I wish I had the electrical chops you do.

Excellent vid.

Joshua Ireland - 8 years ago

Where do you put your fish?! do you carry an esky on the back? or do you let them go?

NDYakAngler - 8 years ago

I mostly catch and release when I'm kayak fishing. I'll attach a stringer to my anchor cleat if I end up keeping something.

Davey Jones - 8 years ago

Love your videos man, better than 95% of fishing shows on TV, because it's not 100% product placement haha. Quick question about how you mounted your transducer, you say it's through the hull. Did you use the stock one that came with the Humminbird 386ci Di or did you have to buy a different one to use through the hull? Thanks in advance!

NDYakAngler - 8 years ago

Thanks man! I used the stock transducer that came with the 386 DI and glued it in with Marine Goop. It works just fine shooting through the plastic hull.

FISH4KAYAK - 8 years ago

Good Kayak

Rick Downunder - 8 years ago

Thanks for the video.I am picking up my new Tarpon 120 tomorrow and I am really keen to set it up for fishing as I live near the beach in South Australia and fishing Kayaking has boomed down here.No more casting from the shoreline anymore.Once I get familiar with the Kayak I will be installing a fish finder with GPS so it was great to see how you had set yours up.Thanks again for taking the time to create this video.Cheers from Rick

NDYakAngler - 8 years ago

Thanks Rick, I'm glad you enjoyed the video! Somehow your comment ended up in my spam folder so I just came across it. Hopefully by now you've had a chance to try out your new kayak! It's always a good idea to take it out once or twice before installing anything just to make sure your intended mounting locations will work out. If the water is warm enough there I'd take it out empty to a calm spot in about chest deep water and test its limits by tipping over and practicing re-entry a few times too. Have fun and be safe out there!

Midwestfishingbros - 9 years ago

Great video and kayak. Im looking to get a kayak soon to fish from. I just came across your channel today, have watched a couple videos and subscribed. I am very impressed with the content you have. Keep it up!

midwestfishingbros

Crawyakker - 8 years ago

+Midwestfishingbros
I recently got a Jackson Cuda 12. I recommend it!

Midwestfishingbros - 9 years ago

I am looking into getting a feelfree lure or a jackson.

NDYakAngler - 9 years ago

Thanks man! I'd highly recommend a kayak, it's a blast getting out and exploring places a regular boat cant get to!

Stu Charles - 9 years ago

I have noticed on YouTube, that a lot of people who are just getting into kayaking, go with the Ascend FS12T from Bass Pro Shops. Then, after a year or so, will purchase one that's a little more expensive. Do you know of anyone, who has a Ascend FS12T? If you were just starting out, would you go with an Ascend Kayak?

NDYakAngler - 9 years ago

I can't think of anyone I know with that kayak, probably because there isn't a bass pro shops anywhere around here though. It does seem like a popular beginner kayak along with some of the Pelicans and I've noticed the upgrade it after a year quite a bit too. For my first kayak I was looking at a Pelican Castaway at Gander Mountain before I went online and found the Tarpon for a few hundred more. I'm glad I went with the Tarpon, it was definitely worth the extra money to be comfortable sitting in it all day and I really like the way it's set up. The FS12T does look like a decent kayak for the price and if that's all someone can afford I'd tell them to go for it, even if they upgrade after a year its always nice to have a spare kayak around to take a friend with. If they're really into fishing and have their eye on a nicer kayak though and money isn't an issue I'd tell them to get the one they really want.

Charles Gonzalez - 9 years ago

nice yak man! workin on mine right now

Taylor Rocheleau - 9 years ago

If you could, PLEASE PLEASE PLEASE. Do a step by step walk through of all the electrical parts to your cameras. What you used and the names. Cause I really like your set up but it's to complicated without a explanation

NDYakAngler - 9 years ago

No problem! It was a complicated project, probably around 150-200 hours of time planning and building everything for both the camera rigs. A lot of work could be saved on the milk crate rig by leaving the power cord outside the camera pole. Having the battery/voltage converter in the crate with enough cord to wrap around the pole and up to the camera once its in place would have made things a lot easier. There's more aftermarket options becoming available for supplying power to a Gopro too so if I had to rebuild the camera rigs I'm not sure I'd go this same route. I'm considering switching over this winter from the heavy lead acid 12v battery to a lithium power supply also. Those usually have a 5v output that I could run directly to the gopro so if I go that route I'll have to tear apart the milk crate portion of the rig and re-wire it. If I do that I'll make sure to video the process.

Taylor Rocheleau - 9 years ago

+NDYakAngler yeah cause I got my dad to look at it and he was very amazed at how well you designed it. And thank you for the explanation

NDYakAngler - 9 years ago

There's a link in the info box for the mini usb plugs I used with the Gopro and the 12-5v converters can be found on ebay. Pretty much everything else I built from scratch using hdpe plastic and 1/8" copper rod for the electrical connectors at the end of the camera pole and inside the receiving end. I might do a basic "how to power a Gopro" video this winter or explain the camera rigs a little further but a lot of it is glued together so I can only show so much.

Quad City Bassin - 9 years ago

Awsome set up. looking to get my own here soon. thanks for the video!

NDYakAngler - 9 years ago

Thanks! It's been well worth everything I've invested in it!

anonymous mc - 9 years ago

You da man!!!!!

Jacob Poore - 9 years ago

do you ever stand up in that thing? im looking for one that i can stand in

NDYakAngler - 9 years ago

I do occasionally but the tarpon isn't really made to stand up in. The WS Ride is a better kayak for standing, it's a little more stable and has a nice flat area in front of the seat to stand on.

Derek Nicholson - 9 years ago

I'd be really interested in learning more about how you create your GoPro set up and installing your battery chargers. Thanks!

NDYakAngler - 9 years ago

If I take everything apart for a cleaning this winter I'll do a quick video showing the camera mounts in more detail. All you have to do to have the Gopro always charging is run a 5v signal to it. I used a 12v battery with a 12-5v converter I ordered from AliExpress although a simple car usb charger can be used as well. I had to put a hole in the Gopro case for the plug to go through so its not waterproof any more. I also used parts from Charge Converter to make my own usb cords. There's a link in the info box to the page and they have a link there for a pinout of the mini usb plug that shows what each pin inside needs to connected to.

keepithookin 21 - 9 years ago

Can these kayaks go up stream?

NDYakAngler - 9 years ago

I paddled it upstream to this spot. The hard spots to get through are generally the shallow spots where the current picks up but I'll hop out and pull it through those if it's easier. At the speed this river flows anything over a foot deep is pretty easy to paddle upstream against.

Stu Charles - 9 years ago

Hi. I went on the Wilderness Systems website and checked out the Tarpon 120. I really like the look of the Tarpon 120, especially in the (Mango) color. Is yours the Flint or Desert Camo color? I also checked out the A.T.A.K. kayak, it's nice too, but alittle more money. Do you have a Wilderness Systems dealer by you? Later bud...

NDYakAngler - 9 years ago

I have the regular green camo, didn't see it on their website any more but I'm sure some dealers still have that color. My old one was mango color which is good for lakes with a little more traffic. Scheels usually has a couple 120s in stock here in Fargo but I've ordered all three of mine from Austin kayak. They're great kayaks as long as you don't really plan on standing in it. The only time I've gone over board was a few weeks ago, I was standing up and the current started to rotate me. I stuck my paddle into the ground to try to regain my balance but it sunk in and I went for a swim.

Julio Meyer - 9 years ago

Nice set up. How many kayak do u have???

NDYakAngler - 9 years ago

Thanks! I have two Tarpon 120's. I used to have two of the orange ones but I sold one to a friend last winter when I picked up my new camo Tarpon.

IronWolfHead - 9 years ago

Hey ... $550 a good price for a 2013 used tarpon 120?

NDYakAngler - 9 years ago

I tow mine on a trailer so I only have to lift it about waist high. They aren't extremely heavy but the awkward shape might make lifting it on top of a taller vehicle difficult. A couple of my friends who put theirs on top of suv's usually lift one end onto the back roof rack bar and grab the lower end of the kayak and slide it the rest of the way on.

IronWolfHead - 9 years ago

is it heavy to car top with one person?

NDYakAngler - 9 years ago

That sounds like a good deal if it's in decent shape. I've only seen a couple used ones come up on Craigslist and they were around that same price.

Ed Forbes - 9 years ago

Really cool setup. Love the camera and mic rigs. If you haven't already done so I'd love to see a more detailed vid of how you rigged those. Tight lines!!!

Ed Forbes - 9 years ago

+NDYakAngler cool. :) thanks for the reply!

NDYakAngler - 9 years ago

Thanks! I thought of trying to video the building process but I spent a few hours a day over a couple months so it would have been tough to do. It was a lot of work already with the limited tools I have and I was cutting it close getting everything done by the time the lakes started to thaw out. If I take them apart to clean all the electrical connections this winter I'll do a more detailed video on how everything works.

Craig Travis - 9 years ago

Excellent Video!! You are a mod genius sir. You set up is well thought out, user friendly, and functional. I love the extra mile you put in with the black screws. That did make a different on the overall appearance. Very professional.

NDYakAngler - 9 years ago

+Craig Travis Thanks Craig! The new rig has been working great!

SlocanSluggr - 9 years ago

thinking of the 120 or 100. Do you think the 100 is this big enough for me? im 6'1 190lbs

MixinitupOutdoors - 9 years ago

wow

Isaac G 32 - 9 years ago

so I know this is an older video, by they the Tarpon and not the Ride?

NDYakAngler - 9 years ago

It was a tough choice between the two. I decided to stick with the Tarpon because I spend most of my time on rivers and when I'm fishing lakes I like to cover a lot of area. The Tarpon is a little faster and better at cutting through river current. I'm still considering picking up a Ride in another year or two so I have something I can stand and fish from when I hit some smaller lakes.

Paul Bercot - 9 years ago

What size guide box is that. I fish 1/4 to 1/2 spinnerbaits a lot and that would be great to to put the popular colors into?

NDYakAngler - 9 years ago

+Paul Bercot The big one is a 3640 and the small one is a 1449.

Alex Giffin - 9 years ago

Love the setup! Great Video!

Tony Dimitri - 9 years ago

Pure genius

JOSH CHRENKO - 9 years ago

Holy crap man...are you an engineer or something? I was with ya until you started on the camera setups...

NDYakAngler - 9 years ago

+JOSH CHRENKO I'm not an engineer, just always been good with electronics and building/modifying things. Plus the long winters here give me plenty of time to get rigged up for the next season.

lucas w37 - 9 years ago

Genius

Wesley Dean - 9 years ago

wow this is amazing your so crafty and smart as hell. prob the best do it at home creations i have ever seen on a yak and they look amazing and like there from a factory awesome man

NDYakAngler - 9 years ago

+Wesley Dean Thanks man! I bet I spent more time just thinking and planning out the next step than actually building on the camera rigs. They turned out great though and so far they've been working without any problems.

Ryan Peterson - 9 years ago

Thanks for putting this together. It has been very helpful. I'm pretty sure I'm getting one of these very soon. I also live/work in the FM area. I would love it if I could pick your brain as I outfit mine.

NDYakAngler - 9 years ago

+Ryan Peterson I'd highly recommend getting a kayak, mine have been well worth what I've invested in them. I don't mind helping out if you have any questions about getting rigged up, you can find my email in the about section on my main channel page. I'm also on facebook, just search for Matt Nelson and it shouldn't be hard to find me.

Jonathan Torres - 9 years ago

Your setup is insane.! I love it. What would you say the total cost for the mods you did would cost? (Not including the GoPros and speakers for the GoPros)

Bass Star - 9 years ago

Very nice video and I compliment your excellent talent at machining your parts. I've watched most if not all of your videos, enjoy them, and learn a lot from them. I actually own the exact same Tarpon 120 including the color you have here and do agree it is a wonderful craft. I am a minimalist though by nature so mine is set up as a lean paddling and fishing machine. Thanks for sharing this video and for the time and effort in producing it.

NDYakAngler - 9 years ago

+Bass Star Thanks! There are days when I'll bring minimum gear too. Sometimes a rod and a paddle are all you need!

Logan Castille - 9 years ago

Can u do a vid on how to pick the perfect kayak for people from what you know about them?

NDYakAngler - 9 years ago

+Logan Castille I haven't spent a lot of time in kayaks other than the Tarpon so I don't have much to compare it to. The Tarpon is a great river kayak and it has good speed for covering distance on open water, good stability too but I definitely wouldn't consider it a stand-up kayak.

Fish n Yak - 9 years ago

How do you get the audio on the zoom to match up with the go pro? Some fancy software?
Nice kayak. I just picked up the Ride 135. Happy fishing.

NDYakAngler - 9 years ago

+Tim Martin Thanks! To swap the audio I'll make a copy of the final video with the native Gopro audio then extract a copy of the audio from it to use in Adobe Audition. Once I have that opened I'll add the Zoom H1 files, line them up, trim them to match the start and end points, do a little EQ work and export the replacement audio file. Then all I have to do is go back to the video editor and mute the native audio, add the replacement file and I'm ready to export the final video with new audio. This one was pretty easy, the fishing videos where I have 20-25 different clips to set the audio to get a little more complicated. There are many other programs that will let you swap audio too and probably a tutorial here on youtube for each one.

Greg Hand - 9 years ago

Awesome setup! Your old one was amazing but I like the carbon fiber additions! And the fact that you machined those brackets and did all the electric on your own blows my mind!! I'm super jealous of your setup! Keep up the good work!!

NDYakAngler - 9 years ago

+Greg Hand Thanks! I was pretty happy with the old setup, you can probably tell by how similar the new one is! A few minor changes but for the most part it's all cosmetic. It sure does look nice though!

Ron Strauss - 9 years ago

Nice Matt! Always fun to see what you've come up with.

NDYakAngler - 9 years ago

+Ron Strauss Thanks Ron! It's pretty much based on my old setup with a few small changes. I really like the new camo kayak!

CaptSteelCity - 9 years ago

Sir, you are the true Macgyver of kayak fishing. Sweet setup man!

NDYakAngler - 9 years ago

+CaptSteelCity Haha thanks! I always watched that show when I was a kid, definitely had to MacGyver some of my power tools to make some of the plastic parts lol!

Braeden Fraser - 9 years ago

Love your videos....awesome kayak setup man !!!

Chris Vaughan - 9 years ago

I'm blown away. No wonder your videos turn out so great. The fish were impressive, but the rig job on this kayak is next-level.

NDYakAngler - 9 years ago

+CHRIS VON Thanks Chris! I'm just glad everything worked when I put all the pieces together!

Greg Blanchard - 9 years ago

Great video! It's easy to see that you've put quality time and effort into your setup. Nice job!

NDYakAngler - 9 years ago

+Greg Blanchard Thanks Greg! I couldn't be happier with how it turned out!

Cameron Cushman - 9 years ago

Be sure to check out Sunsect, its a combined sunscreen and insect repellent. The only one of its kind, many people don't realize that if you use sunscreen and insect repellent separately they void themselves out by over 50%. Sunsect was developed for the Military and just broke ground releasing to the public over a year ago.

Great walkthrough as well

Richard Peebles - 9 years ago

I second the idea of a video dedicated to showing us how you made your electronics set up. Great video!

Jose Florida Pure Fishing - 9 years ago

Great info on your rig.

Phil Franks - 9 years ago

Man, you do some nice work! You don't cut any corners when it comes to your fishing set-up! Thanks for taking the time to show us it!

Dwight Smith - 9 years ago

Very nice and well done video!!

TomHeid1 - 9 years ago

river monster. I had noticed the new paddle in previous videos, nice one. How come the new boat? The old one was pretty awesome I thought. BTW I just bought another one myself. :-)

TomHeid1 - 9 years ago

+NDYakAngler The new boat's a beaut, that's for sure. Appreciate the fine video work your setup produces, not to mention the lunkers you pull over the side..I drool a lot. :-)

NDYakAngler - 9 years ago

+TomHeid1 The old one was getting a little beat up on the bottom from going through shallow rocky stretches like this and the seat was starting to fall apart. I still could have probably got another year or two in it without repairing anything but I decided I'd get a new one. I wanted to switch over to the camo color anyway since there's not much traffic I need to make myself visible to where I fish.

MidwestYakAttack - 9 years ago

Killer new setup! I just finished my crate and was worried about the rods that I have in the crate rod holders getting caught in trees when I'm on the river...Thinking that my crate may only be useful for ponds and lakes which would be pretty disappointing since I fish rivers 90% of the time

NDYakAngler - 9 years ago

+btratcat23 Thanks! That's another reason I decided to angle the rod holders back, at least if I'm moving forward they'll easily bend and slide under any low branches. My old crates had them sticking straight up in the air and I never had much of a problem. Most of the time I stay out of the trees and just cast my lure into them. If I have to go in to retrieve a snag or cool off in the shade for a while I'll pull the rods out of the crate and lay them down between my legs.

Jerry Lester - 9 years ago

Thanks for the update. Your fitting and electrical connections are the best.

NDYakAngler - 9 years ago

+Jerry Lester Thanks Jerry! I'm just glad all the rigging is done, now it's time to put it to use and catch some fish!

matthew stufflebean - 9 years ago

You should really do a vid on how you made the power connectors for the camera and light. Im sure lots of ppl would be interested in a step by step vid

JoRouss - 7 years ago

OMG YES!
Need

klok95330 - 8 years ago

yes!

Troy Davis - 8 years ago

+matthew stufflebean Yes definitely! That is some of the best work I've seen!

Wackzingo - 9 years ago

+matthew stufflebean Yes!

dmoua08 - 9 years ago

this

FlyForPike - 9 years ago

Nice kayak layout! Well though out and not too cluttered. You should market that camera/light mount - professional rigging job throughout.

Ed Spencer - 6 years ago

+NDYakAngler an o-ring land recess at the jack plug hole. A revised case for the camera may be necessary.

Dylan .H - 7 years ago

Maybe glueing a O-ring where it plugs in at might work

NDYakAngler - 9 years ago

+FlyForPike Thanks! I can't imagine a price I'd put on the camera rigs with all the time invested in them. I've thought about taking the idea somewhere, I think I'd need to waterproof the plug going into the Gopro to make it appeal to a bigger market.

CtYakFishin - 9 years ago

Thanks for the info! I've been torn between this kayak and the old town predator. How is stability in your kayak?

NDYakAngler - 9 years ago

+Vinny Brennan I've never fell in, came close while standing a few times but it's not really meant to be a stand up kayak. Sitting down the stability is great!

Andrew Craig - 9 years ago

We got the same kayak. I love mine as well. Just about the same setup except for the depth finder and cameras. How did you make those attachments for you ram balls on the slide tracks in the back? That would make a great DIY vid. I enjoy you vids when I cant get out on the water. Keep your rods bent bro.

Andrew Craig - 9 years ago

Got a plan to make me some now. Just got to decide if I want to go fishing or make some brackets. Thanks.

NDYakAngler - 9 years ago

+Andrew Craig I made them from 3/8" ABS plastic. I drew out a plan first then transferred it over to a sheet of plastic and started cutting and sanding. I used an Irwin bit and tap to put threaded holes into the ABS part so the RAM base screws directly into it and added a couple larger holes at the two ends for the slide trax screws. One trick I used to get the nice smooth edges is to lay down an old fish finder battery on a piece of sandpaper and use it to hold the piece against as I'm sanding it.

skfish - 9 years ago

I really, truly, want to pay you to fabricate some mods for my kayak! I love your camera and microphone mounts! I've been a fan for awhile and all of your video and audio content is top-notch! And, you catch some nice fish, too! Message me if you'd consider a customizing job for my fishing kayak. Awesome video and congrats on your new Tarpon 120!

NDYakAngler - 9 years ago

+Jerry Lester I've been looking at those lithium battery packs, once they up the capacity a little more so I can go all day on one I plan on switching to them as a power source. It would be nice to drop the 13lbs of lead I'm hauling around with me right now.

Jerry Lester - 9 years ago

+skfish I agree. NDYakAngler is the best at details. I too envy his camera and mic powering. I use a KMASHI 5v, 10,000 mAh battery with 2 USB sockets and run the USB power cables from the battery inside the hull to grommeted holes where they exit to connect to my 2 Veho MUVI cameras, one forward and one aft, also. Works okay, but it is not as neat as NDYakAngler's setup.

NDYakAngler - 9 years ago

+skfish Thanks man! I might consider it in the future sometime, during fishing season I don't have much spare time to build though.

MG-70 - 9 years ago

Sweet setup! Nice attention to detail, and very smooth execution in layout and fabrication. Not a bad parking spot, either! Thanks

NDYakAngler - 9 years ago

+MG-70 Thanks! This is one of my favorite spots to pull up the kayak for a lunch break and listen to the water and the birds for awhile. Its a great spot to hop out and wade around that island too, when the water is a little higher there's some nice bass there.

sgtryan98 - 9 years ago

Also, how did you make the plastic divider in your milk crate? My milk crate seems to get cluttered easily so I was thinking of some ways I could organize mine

NDYakAngler - 9 years ago

+sgtryan98 I made it out of ABS plastic, 1/8" thick for the main piece and a 3/4X1/4" strip along the top and bottom of the rear facing side. I used some 5/16" 4-40 screws that went through the 1/8" and screwed directly into the 1/4" plastic behind it. I used a cheap Irwin bit and tap to make the threaded holes in the 1/4" piece and countersunk the holes on the front side of the 1/8" so the screws sit flush when its put together. Pretty similar method to attach it to the crate, I used 3/4" 4-40 screws through the outside of the crate and into the ends of the 1/4" at all four spots they meet.

Shane Davis - 9 years ago

How much was the your kayak??

Shane Davis - 9 years ago

That is true .thank you for responding to my messages like all the you tube video they help a lot .

NDYakAngler - 9 years ago

+Shane Davis I paid around $950 for the new kayak. All the accessories, fishing and camera gear add up quick though!

Troy Whitman - 9 years ago

Always love seeing your setup. Love all the custom stuff. Looks great. Thank you for all your videos!

Jon Fink - 9 years ago

Great video and a very well thought out set up. What river is that on? I used to live in Moorhead and my brother still lives there. He just bought a NuCanoe and he's excited to get into Kayak Fishing.

gmanlipripper - 9 years ago

sick. be safe

Pry Tio - 9 years ago

Awesome setup!

sgtryan98 - 9 years ago

That looks like a tactical kayak right there! That is awesome!!! Love the color and that was creative replacing the stock screws with black screws. That was a really creative setup! Nice job!

Brandon Migliore - 6 years ago

NDYakAngler did the replacement screws go in nice and tight? Factory screws look to be self taping.

NDYakAngler - 9 years ago

+sgtryan98 Thanks man! I think the black screws make it look a lot nicer! I wish they'd use them at the WS factory.

hotbrass2005 - 9 years ago

Very nice! Thanks for putting this together. You have a very nice setup there. I have some ideas I want to implement into mine now!

xTwiGz - 9 years ago

Awesome!

MatamataMikeFishing - 9 years ago

Dude that is an awesome setup. Great video keep it up!

Spook2fluke - 9 years ago

Very nice! What are the specs on your rod reel setups? Curious to know, thanks!

NDYakAngler - 9 years ago

+chreim20 Thanks! I generally fish shorter length med action fast-xfast rods. The ones I use most fishing rivers for smallmouth are my two St Croix Legend Tournament 5'10" M XF spinning rods with Pflueger Patriarch 9530's and a Legend Tournament 6'8" M XF casting with a Quantum Smoke SL100HPT.

The Urban Sportsman - 9 years ago

Brilliant mods, do you have or can you recommend any vids on how you made the camera mounts with the power supplies?

NDYakAngler - 9 years ago

+The Urban Sportsman Thanks! I designed and built pretty much everything myself except for the ball heads at the top of the camera poles. I didn't film any of the building process because I have probably 100 hours of work into each of the camera rigs so it was already time consuming enough. I was also working with limited tools, I used a cheap drill press as a makeshift lathe and a big nail sharpened down to a cutting point to machine out most of the round plastic parts so I didn't want anybody trying to copy me ending up injuring themselves. I came close a couple times lol. A simpler way to run power up to the camera on something like the crate mount would be to just leave the electronics out of the pole and have a long enough cord coming from the power supply in the crate to wrap around the pole and up to the camera once its in place.