Click for more info and reviews of this Fulton Boat Trailer Parts: https://www.etrailer.com/Boat-Trailer-Parts/Fulton/FGB1500100.html Check out some similar Boat Trailer Parts options: https://www.etrailer.com/dept-pg-Boat_Trailer_Parts-sf-Guides.aspx https://www.etrailer.com Don’t forget to subscribe! https://www.youtube.com/user/etrailertv Full transcript: https://www.etrailer.com/tv-review-fulton-boat-guide-fgb1500100.aspx Today we'll be taking a look at the Fulton 50" Boat Guide, part number FGB1500100. The Fulton boat guides are going to provide a visual cue when loading your boat on your trailer. They extend up out of the water so you can find your trailer the first time, every time. They're a simple clamp on installation with no drilling required, and all the hardware's included. The non-marring marine grade PVC will insure that your boat remains protected. It's adjustable within the brackets, so we can move it out or in, so it's going to fit a wide variety of boat holes. That that we've gone over the features we'll go ahead and show you how to get it installed. Keep in mind everything we do on one side we're just going to repeat the same step on the other side. We've already got our back guide on in place. We're going to install some here at the front. The first thing we need to do is we're going to need our guide on. We're going to need our bottom plate, our top plate, and two U-bolts. We're going to take our bottom plate and we're going to install it in this fashion right here with our single holes towards the boat there. We'll go underneath, put our top plate in this position here. We're going to go over the top with the U-bolts. Go in those first holes that we talked about before. Then we're going to go with the closest ones that we can, as you see there. Then we're going to loosely install our hardware on the bottom. With that in position we're going to take our included hardware. It's going to be a lock washer and a nut, and we're going to need four of those to go on. We'll get each of those started. Now with that loosening saw let's go ahead and grab our PVC guide on. We're going to slip it in just like this, so it sits right on top of our trailer's frame. When you position this you just want to adjust it to the depth that you want. We're going to put it about an inch away from our boat, and then we can tighten it the rest of the way down. Now we're using 9/16 socket wrench to get that tightened down. What you want to do is you want to alternate in between so you can a nice even fit. That's pretty secure. Last thing we need to do is turn our attention to our end cap here. We want to make sure that our end cap stays in place, so the kit comes with two screws so we can do so. We're going to drill a pilot hole on either side, and then put those in. We'll take out included screws and we'll put those in place. With both guide ons installed that's going to pretty much do it. That's going to complete our look at the Fulton 50" boat guide, part number FGB1500100.