Welcome to Fuerteventura, in the Canarian Islands! A FPV volcanic haven. Volcanos, canyons, endless space, freedom... Let's surf some magma! I truly had a blast, thanks to Olivier (flying the Parrot Disco wing) and my bro Tommy (representing Magma, best kitesurf school ever!); a shoutout to Marcelo and Andreas (bikers) and Bas for the Rapture Gopro 3d printed mount. When do we go back? Gratz to the crew and fly safe! Join us! Please subscribe! It will make my day. Also, you can follow me on instagram: http://www.instagram.com/nilsenfpv Planning on going to Fuerteventura for a fpv, kitesurf and freedive trip? Make sure to contact Tommy at www.magma-kiteschool.com! Setup: - Shendrones Rapture (white Taulman 645 canopy, plus configuration) - Betaflight 3.2.0-RC3 - 5x45x3 Gemfan Master Series props (white blend) - X-Foot 2208 2650kv motors - Hobbywing 40A 4-in-1 escs (Dshot 600) - Betaflight FC3 - Runcam Swift Fpv camera (2.3mm lens @55°) - Thunderpower 4S 1900mah 80-160C - ImmersionRC 200mw Tramp v2 Vtx - TBS Crossfire micro receiver - Lumenier AX2 5.8ghz antenna - Gopro Session 4 + 3d printed camera mount (@45°) - AUW: 594g - X-Foot Cheetah streched X frame (7mm thick arms) - Betaflight 3.2.0-RC3 (no air mode, no filters, no assistance, always pure acro!) - 5x50x2 Azure Power Pro Carbon (awesome props) and 5x45x3 Gemfan Master Series props (fluo yellow blend) - X-Foot 2207 2600kv motors - Hobbywing 40A 4-in-1 escs (Dshot 600) (main connector taken off, escs signal to fc soldered) - Betaflight FC3 - Runcam Micro-Swift Fpv camera (2.1mm lens @40°) - Dinogy Mega Graphene 2.0 4S 1550mah 75-150C batteries - ImmersionRC Tramp v2 Vtx @200mw - TBS Crossfire micro receiver - Lumenier AX2 5.8ghz antenna - Gopro Session 4 + 3d printed camera holder (@40°) - AUW: 560g Ground setup: - Fatshark Dominator v3 - FuriousFPV TRUE-D V3.5 diversity receiver - TBS Triumph 5.8GHZ antenna - ImmersionRC 8Dbi patch antenna - FrSky Taranis - TBS Crossfire emitter @200mw Music: I'll Keep Coming - Low Roar